GetFRP

Market research · Glass fiber sourcing

China Glass Fiber Market 2026: Producers, Prices, Grades and Duties

China produced 8.43 million tonnes of glass fiber yarn in 2025, up 11.5%, and three tank-furnace groups, Jushi, Taishan and CPIC, hold about 70% of domestic capacity. Standard 2400 tex E-glass direct roving traded at a national average of RMB 3,730–3,790 per tonne between June and September 2026, while the EU charges 17.2–23.0% anti-dumping plus 5.8–10.2% countervailing duty on Chinese roving and mat. For a buyer the decision is glass type, sizing and plant qualification, and this report gives the numbers for each.

By GetFRP team · Published · Research cut-off 3 November 2026 · Editorial policy · 5 figures, 7 charts, 7 tables, 41 sources

Evidence tags:StatisticCompany dataOfficial sourceGetFRP estimateStatistics, company disclosures, forecasts and estimates retain their stated scope.
Chopped glass fiber strands, glass microspheres and two glass fabrics, plain weave and twill, laid out on a table with a ruler
Three of the forms a buyer sources from China: chopped strands (top right), a plain-weave fabric and a twill fabric, with glass microspheres for scale. China made 8.43 million tonnes of glass fiber yarn in 2025, and 1.84 million tonnes of it was thermoplastic yarn, much of which leaves the plant as chopped strand. [S1] Photo: Glass reinforcements by Cjp24. CC BY-SA 3.0, via Wikimedia Commons.

Key numbers at a glance

8.43 Mt
China glass fiber yarn output, 2025
+11.5%; tank-furnace yarn 8.12 Mt (96%)
StatisticCGFIA via Jushi and CPIC annual reports [S1] [S2]
About 70%
Share of China's capacity held by Jushi, Taishan and CPIC
six groups hold about 70% of global capacity
Company dataChina Jushi 2025 annual report [S1]
3.20 Mt
China Jushi roving and products sold, 2025
Taishan 1.37 Mt; CPIC 1.18 Mt
Company dataAnnual reports [S1] [S2] [S3]
RMB 3,730–3,790/t
E-glass 2400 tex direct roving, national average, Jun–Sep 2026
+3% to +6% year on year
StatisticSublime China Information via NetEase [S5]
9.3 Mt
China yarn capacity, mid-2026
8.65 Mt in production
StatisticCGFIA via NetEase [S5]
1.95 Mt
Glass fiber and product exports, 2025
−3.6% in volume; USD 2.85 bn, +1.6%
StatisticCGFIA [S1] [S2]
23.0% + 10.2%
EU anti-dumping plus countervailing duty on CNBM-group roving and mat
from 26 Nov 2025; Jiangsu Changhai 17.2% + 5.8%
Official sourceEU Regs 2025/2337 and 2025/2328 [S30] [S31]
101 GPa
Glass modulus of Jushi E9, the stiffest tank-furnace glass published
standard E-glass 74 GPa on the same test
Company dataJushi E9 brochure [S8]

1. Who makes glass fiber in China: output, capacity and the big three

China's glass fiber industry is a tank-furnace oligopoly. The China Glass Fiber Industry Association (CGFIA) counted 8.43 million tonnes of yarn output in 2025, up 11.5% after two years of low growth, of which tank-furnace yarn was 8.12 million tonnes, up 11.8% [statistic] [S1] [S2]. Seven new large furnaces and three cold-repaired furnaces fired up during the year, adding 860,000 tonnes of capacity [statistic] [S2]. By mid-2026 total capacity stood near 9.3 million tonnes with 8.65 million tonnes in production, and first-half 2026 output grew a slower 7.9% [statistic] [S5]. Output has compounded at 8.82% a year since 2016 [statistic] [S1].

Concentration is the defining fact for a buyer. Jushi's annual report puts six producers, Jushi, Taishan Fiberglass, Chongqing Polycomp International (CPIC), Owens Corning, Nippon Electric Glass and Shandong Fiberglass, at about 70% of global capacity, and China's three leaders at about 70% of domestic capacity [company] [S1]. Jushi sold 3.20 million tonnes of roving and products plus 1.062 billion meters of electronic cloth in 2025 on revenue of RMB 18.88 billion, up 19.1%, from four Chinese bases and plants in Suez, Egypt and South Carolina, USA [company] [S1]. Taishan, the glass fiber arm of Sinoma Science and Technology, sold 1.37 million tonnes from more than 1.7 million tonnes per year of capacity after its Taiyuan lines started [company] [S3]. CPIC sold 1.18 million tonnes on revenue of RMB 8.66 billion and runs bases in Bahrain and Brazil [company] [S2].

The Western benchmark has changed hands. Owens Corning completed the sale of its glass reinforcements business to Praana Group on 1 May 2026 at an enterprise value of USD 645 million [company] [S40], so an Advantex or Owens Corning-branded roving now comes from a different corporate owner than it did in 2025. Chinese producers, by contrast, are still adding lines: Jushi is building a 200,000-tonne high-performance line in Chengdu and a 100,000-tonne electronic yarn line in Huai'an, and is cold-repairing two Tongxiang furnaces [company] [S1] [S4].

The 2025 output mix shows where the growth went. High-modulus wind yarn reached 1.436 million tonnes and thermoplastic yarn 1.843 million tonnes, while ordinary thermoset direct roving, the feedstock of pultrusion, filament winding and most open molding, was 2.513 million tonnes [statistic] [S1]. Domestic apparent consumption of thermoset reinforcement yarn rose 22.6% to 3.797 million tonnes [statistic] [S1].

Glass fiber plant with batch silos, furnace building and production halls in open farmland in Battice, Belgium
A tank-furnace glass fiber plant (3B, Battice, Belgium). Every large Chinese producer uses the same architecture of batch house, continuous melting tank, forehearths and platinum-rhodium bushings; tank-furnace yarn was 8.12 million tonnes, or 96% of China's 2025 output. [S2] Photo: 3B Glass Fibre Plant Battice, Belgium by Cambarellus. CC BY-SA 4.0, via Wikimedia Commons.
Figure 1. China glass fiber yarn output by type, 2025Statistic

↔ Scroll horizontally to see the full chart and data table.

Thermoset direct roving2.513 MtThermoplastic yarn1.843 MtHigh-modulus (wind) yarn1.436 MtAssembled roving1.101 MtElectronic yarn0.886 MtIndustrial yarn0.651 Mt

Source: China Glass Fiber Industry Association 2025 statistics as reprinted in the China Jushi and CPIC 2025 annual reports. The six categories reported by the association add up to the 8.43 Mt national total.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Thermoset direct roving2.513MtStatistic——
—Thermoplastic yarn1.843MtStatistic——
—High-modulus (wind) yarn1.436MtStatistic——
—Assembled roving1.101MtStatistic——
—Electronic yarn0.886MtStatistic——
—Industrial yarn0.651MtStatistic——
Figure 2. Glass fiber and products sold by China's three leaders, 2025Company data

↔ Scroll horizontally to see the full chart and data table.

China Jushi3.20 MtTaishan (Sinoma S&T)1.37 MtCPIC1.18 Mt

Source: China Jushi, Sinoma Science and Technology and CPIC 2025 annual reports. Jushi reports roving and products (plus 1.062 bn m of electronic cloth); Taishan 1.024 Mt of yarn plus 0.344 Mt of products; CPIC 1.177 Mt of glass fiber and products. Scopes differ slightly and the figures are not summed.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—China Jushi3.2MtCompany data——
—Taishan (Sinoma S&T)1.37MtCompany data——
—CPIC1.18MtCompany data——
Table 1. Leading glass fiber producers relevant to buyers sourcing from China, 2025
Producer2025 volume and scalePlantsWhat to source thereProfile
China Jushi (CNBM)3.20 Mt roving and products; revenue RMB 18.88 bn; gross margin on glass fiber 32.2%Tongxiang, Jiujiang, Chengdu, Huai'an; Suez (Egypt); South Carolina (USA)E6 boron-free roving, E7/E8/E9 high-modulus wind yarn, SMC, mat, woven roving, electronic clothView profile
Taishan Fiberglass (Sinoma Science and Technology)1.37 Mt sold; capacity above 1.7 Mt/yr; revenue RMB 8.9 bnTaiyuan base (started 2025) and other Chinese plantsThermoset and thermoplastic yarn, LFT yarn, wind multiaxials, low-Dk and low-CTE clothView profile
Chongqing Polycomp International (CPIC)1.18 Mt sold; revenue RMB 8.66 bn; above 25% share in wind yarn and fabricsChongqing; Bahrain; BrazilTM high-modulus wind yarn, thermoplastic chopped strand, PU-compatible wind yarn, LDK electronic yarnView profile
PGTEX China (CPIC group)Named exporter in the EU fabric cases (37.6% AD, 17.0% CVD)ChangzhouStitched multiaxial glass and carbon fabricsView profile
Shandong FiberglassOne of the six groups holding about 70% of global capacityShandongDirect roving and chopped strand—
Owens Corning reinforcements, now Praana GroupSold 1 May 2026 at USD 645 m enterprise valueGlobal networkAdvantex E-CR benchmark grades—

Source: Company annual reports, EU Implementing Regulations 2026/1203 and 2026/1928, Owens Corning release. 'Profile' opens a GetFRP supplier page where one exists.

2. Glass fiber price in China 2026: roving flat, electronic yarn at a record

Commodity roving has recovered only modestly from the 2023 to 2024 trough. Sublime China Information (SCI) put the national average for 2400 tex E-glass winding direct roving at RMB 3,781 per tonne in the second quarter of 2026, up 1% year on year and 5% on the quarter, and the end-June and mid-September averages at RMB 3,791 and 3,732, up 3.1% and 5.9% year on year [statistic] [S4] [S5]. These are delivered, VAT-inclusive averages for standard grades; high-modulus wind yarn and thermoplastic chopped strand sell above them, and medium-alkali yarn below. For comparison, Caitong Securities' glass fiber price series peaked at RMB 7,008 per tonne in November 2021 [statistic] [S5].

The two leaders' accounts give a cross-check on realized prices. Dividing Jushi's 2025 glass fiber revenue of RMB 18.35 billion by its 3.20 million tonnes of roving and products gives about RMB 5,700 per tonne, and Taishan's RMB 8.9 billion over 1.37 million tonnes about RMB 6,500 per tonne [estimate] [S1] [S3]. Both figures include fabrics, mats and electronic cloth, so they sit well above the commodity roving average and should not be read as a roving quote. Taishan reported a 14% rise in average selling price in 2025 [company] [S3].

Electronic yarn is a different market. G75 electronic yarn averaged RMB 14,250 per tonne at end-June 2026 and RMB 23,450 by mid-September, up 167.4% year on year, and 7628 electronic cloth averaged about RMB 10.2 per meter in August against RMB 4.15 a year earlier, as AI server demand pulled capacity toward low-dielectric and low-expansion products [statistic] [S5]. CGFIA counted RMB 13.38 billion of special electronic glass fiber projects under construction or planned at end-2025, most due in 2027 [statistic] [S1]. A reinforcement buyer feels this indirectly: furnace capacity and capital move toward the higher-margin products.

Supply in 2026 is tight at the margin. Only one new furnace fired in the first half of 2026, Inner Mongolia Tianhao's 150,000-tonne line 3, while Jushi's Tongxiang line 4 and Taishan's F02 line were down for cold repair; Guojin Securities linked the slowdown to producers' capital going into electronic cloth and to the rising cost of platinum for bushings [media] [S4]. Jushi wrote off RMB 373 million of platinum-rhodium alloy loss in 2025 and paid RMB 553 million in cash for platinum, against RMB 202 million in 2024 [company] [S1]. CPIC warns that early-2026 cold repairs could leave the market locally short [company] [S2].

Figure 3. E-glass 2400 tex direct roving national average, 2025–2026Statistic

↔ Scroll horizontally to see the full chart and data table.

01,2502,5003,7505,0003,743*Q2 20253,601*Q1 20263,781Q2 2026 avg3,791End-Jun 20263,73215 Sep 2026RMB/t

Source: Sublime China Information as quoted by Guojin Securities (21 Aug 2026) and NetEase (13 Oct 2026). * Back-calculated from the reported +1% year-on-year and +5% quarter-on-quarter changes for Q2 2026 [estimate]. Delivered, VAT inclusive. Points are unevenly spaced.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Q2 20253743RMB/tGetFRP estimate——
—Q1 20263601RMB/tGetFRP estimate——
—Q2 2026 avg3781RMB/tStatistic——
—End-Jun 20263791RMB/tStatistic——
—15 Sep 20263732RMB/tStatistic——
Figure 4. Glass fiber price cycle turning points, 2013–2021 (Caitong Securities series)Statistic

↔ Scroll horizontally to see the full chart and data table.

02,5005,0007,50010,0004,896Dec 20135,942Apr 20154,790Jun 20175,492May 20187,008Nov 2021RMB/t

Source: Caitong Securities cycle series as quoted by NetEase (13 Oct 2026). A broker composite series, not the SCI 2400 tex roving average in Figure 3; the two are not directly comparable.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Dec 20134896RMB/tStatistic——
—Apr 20155942RMB/tStatistic——
—Jun 20174790RMB/tStatistic——
—May 20185492RMB/tStatistic——
—Nov 20217008RMB/tStatistic——
Table 2. What moves Chinese glass fiber prices, and the 2025–2026 evidence
Driver2025–2026 evidenceEffect for a roving buyer
New furnace capacity860 kt added in 2025; one 150 kt line fired in H1 20262025 supply growth capped prices; 2026 is a light year for new supply
Cold repairsJushi Tongxiang line 4 (Jan–Jun 2026) and line 5 announced; Taishan F02Temporary tightness in specific grades and plants
Platinum and rhodiumJushi platinum cash outlay RMB 553 m in 2025 vs 202 m in 2024; alloy loss RMB 373 mRaises the capital cost of new bushings and capacity
Electronic cloth boomG75 yarn +167% year on year by Sep 2026Capital and furnace time shift away from commodity roving
Domestic demand mixThermoset reinforcement consumption +22.6% in 2025; H1 2026 wind installations about −25%Wind yarn demand cooled in 2026 after the 2025 peak
Export headwindsExports −3.6% in 2025; Jan–Aug 2026 +4.7% to 1.379 MtProducers push export volume when home demand slows

Source: CGFIA via annual reports; Guojin Securities; NetEase industry review. See Sources.

3. E-glass vs E-CR vs high-modulus vs S-glass: which glass type to specify

Glass chemistry sets the modulus ceiling before any sizing or process choice. Traditional E-glass is a calcium aluminoborosilicate with 8–13% boron oxide in Hexcel's reference composition; S-2 Glass is a magnesium aluminosilicate with 64–66% silica, 24–26% alumina and no boron [company] [S21]. Most Chinese direct roving is now boron-free: Jushi describes its E6 as an E-CR glass under ASTM D578, and 3B describes its E-CR rovings the same way under ASTM D578 and ISO 2078 [company] [S6] [S14]. On Jushi's own test basis, standard E-glass has a glass modulus of 74 GPa, E6 81 GPa, E7 89 to 90 GPa, E8 95 GPa and E9 101 GPa, with thermal expansion falling from 6.1 to 4.7 × 10⁻⁶/K and softening point rising from 838 to 970 °C [company] [S7] [S8]. AGY's reference E-glass lists 72 GPa, 2.54 g/cm³, 5.4 × 10⁻⁶/°C expansion and a dielectric constant of 6.1 at 10 GHz, the values most Western design handbooks still assume [company] [S20].

The strand data matter more than the glass data for a buyer because they include the sizing. In epoxy-impregnated strand tests to ASTM D2343, Jushi reports 1,900–2,000 MPa and 73–75 GPa for E-glass, 2,500–2,700 MPa and 81–83 GPa for E6, 2,800–3,000 MPa and 89–91 GPa for E7, and 3,100–3,500 MPa and 95–98 GPa for E8 [company] [S7] [S8]. In epoxy UD laminates at 55% fiber volume the same grades give 49–50 GPa (E7), 51–52 GPa (E8) and 54–55 GPa (E9) tensile modulus [company] [S8]. That 10% laminate gain from E7 to E9 is what lets glass spar caps reach longer blades: CPIC reports its high-modulus pultruded plates in service on blades above 90 m [company] [S2].

Western high-performance glasses sit in the same band. 3B's HiPer-tex W 2020, an R-glass, lists 2,700–2,900 MPa, 86–89 GPa and 3.1–3.3% strain on the strand test and 48 GPa in a 56% UD epoxy laminate [company] [S16]. AGY's S-2 Glass claims 30% higher strength and 15% higher modulus than E-glass at the same fiber volume, a 20% lower dielectric constant, and a 1,056 °C softening point [company] [S19]. CPIC says it developed a 100 GPa ultra-high-modulus wind glass in 2025 that supports blades longer than 110 m [company] [S2]. Chinese tank-furnace high-modulus glass therefore now matches or exceeds the classic S- and R-glass modulus; S-2 keeps an edge in strain to failure and impact work, and it is still produced at much smaller scale.

Figure 5. Tensile modulus by glass typeCompany data

↔ Scroll horizontally to see the full chart and data table.

E-glass (Jushi reference)74 GPaE6 / E-CR (Jushi)81 GPaS-2 Glass (Hexcel table)86 GPaHiPer-tex R-glass (3B)88 GPa*E7 (Jushi)90 GPaE8 (Jushi)95 GPaCPIC ultra-high-modulus (2025)100 GPaE9 (Jushi)101 GPa

Source: Jushi E8 and E9 brochures (ASTM E1876 glass modulus); 3B HiPer-tex W 2020 datasheet (ASTM D2343 strand); Hexcel HexForce handbook (12.5 Msi converted); CPIC 2025 annual report. * Midpoint of the 86–89 GPa range [estimate]. Test bases differ: glass, strand and handbook values are indicative, not interchangeable allowables.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—E-glass (Jushi reference)74GPaCompany data——
—E6 / E-CR (Jushi)81GPaCompany data——
—S-2 Glass (Hexcel table)86GPaCompany data——
—HiPer-tex R-glass (3B)87.5GPaGetFRP estimate——
—E7 (Jushi)90GPaCompany data——
—E8 (Jushi)95GPaCompany data——
—CPIC ultra-high-modulus (2025)100GPaCompany data——
—E9 (Jushi)101GPaCompany data——
Table 3. Glass types a buyer can specify, with published properties
Glass typeTypical name or gradeDensity (g/cm³)Modulus (GPa)Strand strength, ASTM D2343 (MPa)CTE (10⁻⁶/K)Where it is used
E-glass (boron-containing)Jushi E reference; AGY E-glass2.54 (AGY)72–741,900–2,000 (Jushi)5.4–6.1General purpose, electrical laminates
E-CR / boron-freeJushi E6; 3B SE 1010; Advantex2.62812,200–2,7006.0–6.1Pultrusion, pipes, tanks, corrosion service
High-modulus (wind)Jushi E7, E8; CPIC TM2.60–2.6389–952,800–3,5005.2–5.5Wind spar caps and blade fabrics, pressure pipe
Ultra-high-modulusJushi E9; CPIC 100 GPa gradenot published100–1013,100–3,500 (E9)4.7 (E9)Blades above 100 m, high-stiffness profiles
R-glass3B HiPer-tex W 20202.5886–892,700–2,900not publishedWind, ballistic panels, pressure vessels
S-2 GlassAGY S-22.49864,585 (fiber, handbook)1.6Aerospace, armor, radomes, pressure vessels

Source: Jushi E8 and E9 brochures; 3B SE 1010, HiPer-tex W 2020 datasheets; AGY L-Glass and S-2 datasheets; Hexcel HexForce Fabrics Handbook (US-unit table converted). Strength values on different bases are comparable only in order of magnitude.

4. Tex, filament diameter and sizing: matching roving to UP, VE, epoxy, PU and the process

A glass fiber designation is a compressed specification. Jushi's example code E6 DR 24-2400-386T reads as glass type, direct roving, 24 µm filament diameter, 2400 tex and product code 386T [company] [S41]. Tex is grams per kilometer of strand, so 2400 tex is 2.4 g/m. Filament diameter rises with tex in a direct roving: Johns Manville's StarRov line runs 13 µm at 300 tex, 16 µm at 1,200 to 2,400 tex, 23 µm at 4,800 tex and 32 µm at 9,600 tex, and 3B's epoxy roving moves from 16 µm at 300 tex to 24 µm at 4,800 tex [company] [S17] [S15].

The sizing is where resin compatibility lives. Thomason's review puts the loss on ignition of most commercial glass fiber at 0.5–1.5%, with film formers making up 70–90% of the size solids and chosen to match the intended matrix, and the silane coupling agent bonding the film former to the glass [peer-reviewed] [S22]. Manufacturer catalogs make the matching explicit. Taishan's single-end rovings split into polyester and vinyl ester grades (T910, T912, T930, T931), a multi-resin grade (T921N) and epoxy grades (T920, T920H, T940H, T980), all at an LOI of 0.55% [company] [S18]. AGY sells S-2 roving with binder 365 for polyester, vinyl ester and epoxy, 449 for amine-cured epoxy and urethane, 463 for anhydride epoxy and phenolic, and 933 for high-temperature thermoplastics [company] [S19]. Johns Manville's StarRov 090 covers polyester, vinyl ester, epoxy and polyurethane, while StarRov 086 omits polyurethane [company] [S17].

Jushi's product pages map codes to processes. For pultrusion it lists 312T for sucker rods and high-end profiles, 386T and 386H for general sections and optical cable, 310H for epoxy electrical insulating rods and 332 for polyurethane profiles and spar caps [company] [S9]. For filament winding it lists 162, 162K and 162E for continuous pipe and 308, 308H and 308S for epoxy high-pressure pipe and CNG cylinders, separated by amine or anhydride cure [company] [S11]. For SMC it lists 410J, 440, 442K, 448 and 456 by surface and strength class [company] [S10], and for wind fabrics 320, 380, 390, 396 and 398 split between infusion and prepreg, epoxy and polyester [company] [S12]. A buyer that asks for '2400 tex roving' without the code and resin is asking for any one of these.

Change control is the practical risk. A supplier can keep the tex and glass type and change the sizing, the bushing or the plant, and every one of those can shift wet-out speed, fuzz, interlaminar shear and fatigue. 3B's epoxy roving gives 59 MPa interlaminar shear and 255 MPa fatigue strength at a million fully reversed cycles in a 55% UD laminate [company] [S15]; those are the kinds of values a qualification should freeze against a named code and plant.

↔ Scroll horizontally to see the full diagram.

Continuous glass fiber production on a tank-furnace lineRaw materials from batch silos are melted in a gas-fired tank furnace. Refined molten glass flows along a forehearth channel to platinum-rhodium bushings. Hundreds to thousands of filaments are drawn through the bushing tips, cooled by fins and water sprays, coated with an aqueous sizing by a roller applicator, gathered into a strand and either wound into direct roving packages or chopped into short strands, then dried and packed.pyrophyllite, kaolin, limestone, quartzoxy-fuel or air-gas burnersmelting and refiningforehearth channels feed many bushing positionsfurther bushing positions on the same channelplatinum-rhodium bushing with tipscooling fins, water spraysaqueous sizing: film former + silanegathering shoe: filaments become a strandwinderchopperdrying oven, then packing1Batch house2Tank furnace3Forehearth4Bushing,fiberizing5Sizing applied6Direct roving7Chopped strand8Dry, inspect, packSizing chemistry, tex and filament diameter are fixed at stages 4 to 6; a change at any of them is a new product for qualification purposes.
Figure 6. How continuous glass fiber is made: batch is melted in a tank furnace, refined glass flows along forehearths to platinum-rhodium bushings, filaments are drawn and cooled, sizing is applied by roller, and strands are gathered and either wound into direct roving cakes or chopped. Commercial sizing leaves 0.5–1.5% LOI on the glass [peer-reviewed] [S22]; Jushi wrote off RMB 373 million of bushing alloy loss in 2025 [company] [S1]. Schematic drawn by GetFRP; not to scale.
Table 4. Matching glass reinforcement to process and resin
ProcessTypical form and texFilament (µm)Resin and sizing to requestExample codes
PultrusionDirect roving 2,400–9,600 tex plus CFM and veil16–32Silane sizing for UP/VE; separate epoxy or PU grade for those resinsJushi 312T, 386T, 332 (PU), 310H (epoxy rods); 3B SE 1010; StarRov 090
Filament windingDirect roving 1,200–4,800 tex16–24UP/VE for pipe and tanks; epoxy amine or anhydride grade for pressure pipe and cylindersJushi 162, 162E, 308H, 308S; Taishan T920, T980
Infusion and NCF fabricsDirect roving 600–2,400 tex woven or stitched16–17Epoxy grade for wind; UP grade for marineJushi 380, 390, 398; 3B SE 2020, HiPer-tex W 2020
SMC and BMCAssembled roving 2,400–4,800 tex, chopped in linenot statedFast choppability and low static; Class A surface gradesJushi 410J, 440, 448, 456 (ASMC); 562A (BMC)
Hand lay-up and sprayChopped strand mat by g/m²; woven roving 270–1,600 g/m²not statedEmulsion-bound mat for fast wet-out; powder-bound mat for higher strengthJushi E01, E10, E20 (emulsion); P02, P20 (powder); EWR270–EWR1600
Thermoplastic compounding and LFTChopped strand 4.5–12 mm; single-end roving 2,400 tex10–16 (chopped)PA, PP or PBT-specific sizingStarRov 490, 895; Taishan LFT yarn

Source: Jushi product pages; Johns Manville product selector; 3B datasheets; Taishan TDS via Revchem; AGY roving datasheet. Mat weights and diameters are catalog ranges; confirm per order.

5. Chopped strand mat, woven roving and multiaxial fabrics from China

Converted products are a large and separately protected part of China's trade. In 2025 China exported 1.123 million tonnes of commercial yarn, 304,000 tonnes of woven fabrics, 226,000 tonnes of chemically bonded mat, 91,000 tonnes of mechanically bonded (needled or stitched) mat and 206,000 tonnes of prepreg and other products [statistic] [S2]. Woven fabrics are the product line hit hardest abroad: the EU's anti-dumping and countervailing duties on woven and stitched glass fabrics run to 69.0% plus 30.7% for the Jushi and Taishan group, which Jushi reports as a combined 99.7% [official] [S35] [S36] [company] [S1].

Chopped strand mat is sold by binder. Jushi's catalog separates emulsion-bound mats (E01, E10, E20), sold on fast wet-out and air release, from powder-bound mats (P02, P20), sold on tensile strength and conformability for large hand lay-up parts [company] [S13]. The Chinese product standard is GB/T 17470-2007 for chopped strand and continuous filament mat [official] [S28]. Woven roving runs from 270 to 1,600 g/m² in Jushi's EWR range, with plain and twill constructions for hand lay-up, compression molding and pipe joints [company] [S13]; its national standard is GB/T 18370-2014, and stitched fabrics fall under GB/T 25040-2010 [official] [S26] [S27].

Wind fabrics are where Chinese weavers and Chinese glass are most integrated. CPIC claims more than 25% of the global market for wind yarn and fabrics and says its high-modulus pultruded plates are used on blades longer than 90 m [company] [S2]. For a buyer of multiaxials the questions are the roving code inside the fabric, the stitching yarn and the areal weight tolerance, because the fabric certificate rarely names the glass grade unless asked.

High-resolution scan of a heavy woven glass fiber fabric of 1100 grams per square meter showing flat roving bundles in a plain weave
A 1,100 g/m² woven glass fabric scanned at 1,600 dpi. China exported 304,000 tonnes of woven glass fabrics in 2025, and the EU charges these products an anti-dumping duty of 34.0 to 69.0% plus a countervailing duty of 17.0 to 30.7%. [S2] [S35] [S36] Photo: Fibreglass fabric 1100g per m2 by Achim Hering. CC BY 3.0, via Wikimedia Commons.
Figure 7. China's glass fiber exports by product, 2025Statistic

↔ Scroll horizontally to see the full chart and data table.

Commercial yarn and roving1,123 ktWoven fabrics304 ktChemically bonded mat226 ktPrepreg and other products206 ktMechanically bonded mat91 kt

Source: China Glass Fiber Industry Association 2025 statistics as reprinted in the China Jushi and CPIC 2025 annual reports. Total exports were 1.950 Mt; the five association categories are shown as reported.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Commercial yarn and roving1123ktStatistic——
—Woven fabrics304ktStatistic——
—Chemically bonded mat226ktStatistic——
—Prepreg and other products206ktStatistic——
—Mechanically bonded mat91ktStatistic——

6. GB/T, ISO and ASTM standards for glass fiber roving, mat and fabrics

Chinese glass fiber standards are mostly harmonized with ISO test methods, which makes certificate checking easier than buyers expect. The product standard for roving is GB/T 18369-2022, in force since 1 May 2023 and freely downloadable from the national registry [official] [S23]. The yarn test methods, GB/T 7690.1 (linear density), 7690.3 (breaking force and elongation) and 7690.5 (filament diameter), and the reinforcement test methods, GB/T 9914.1 (moisture), 9914.2 (combustible matter, the LOI test) and 9914.3 (mass per unit area), are flagged by the registry as adopted from international standards [official] [S24] [S25]. The EU regulations themselves define the excluded high-LOI rovings by ISO 1887, the LOI method [official] [S30].

Designation and special tests have their own numbers. GB/T 4202-2023 sets Chinese glass fiber product codes [official] [S29]. GB/T 36494-2018 measures roving static, GB/T 26734-2011 sizing solubility, and GB/T 14208.1-2009 the mechanical properties of roving-reinforced resin rods [official] [S26]. In export documentation the familiar Western references are ASTM D578 for glass type classification, ASTM D2343 for impregnated strand tensile tests and ISO 527-5, ISO 14126 and ISO 1172 for UD laminate tension, compression and fiber content, all of which appear in Jushi and 3B datasheets [company] [S7] [S14] [S16].

Table 5. Standards that govern a glass fiber purchase from China
StandardEnglish title or scopeStatusUse in a purchase
GB/T 18369-2022Glass fiber rovingIn force from 1 May 2023Product requirements for direct and assembled roving
GB/T 17470-2007Glass fiber chopped strand mat and continuous filament matIn forceMat requirements
GB/T 18370-2014Glass fiber woven roving fabricIn force from 1 Oct 2015Woven roving requirements
GB/T 25040-2010Glass fiber stitched fabricsIn force (adopted)Stitched and multiaxial fabrics
GB/T 4202-2023Glass fiber product codesIn force from 1 Jun 2024Reading Chinese designations
GB/T 7690.1 / .3 / .5-2013Reinforcements, yarn test methods: linear density; breaking force and elongation; filament diameterIn force (adopted from ISO)Tex, strand strength and diameter checks
GB/T 9914.1 / .2 / .3-2013Reinforcement products, test methods: moisture; combustible-matter content; mass per unit areaIn force (adopted from ISO)Moisture, LOI and areal weight checks
GB/T 36494-2018; GB/T 26734-2011Roving static; sizing solubilityIn forceProcess-specific checks for chopping and mat binders
ASTM D578; ISO 2078Glass fiber strand classification; textile glass designationReferenced in datasheetsE-glass vs E-CR vs R classification
ASTM D2343; ISO 527-5; ISO 14126; ISO 1172Impregnated strand tension; UD laminate tension and compression; fiber contentReferenced in datasheetsStrand and laminate property claims

Source: SAMR national standards registry (openstd) entries; Jushi and 3B datasheets; EU Implementing Regulation 2025/2337.

7. EU anti-dumping duty on Chinese glass fiber, US tariffs and other trade measures

The EU has protected its glass fiber industry since 2011 and tightened the measures in 2025 and 2026. After an interim review requested by the European glass fiber producers' association, the anti-dumping duty on Chinese continuous filament glass fiber products (chopped strands up to 50 mm, rovings with LOI up to 3%, and mats, CN 7019 11 00, ex 7019 12 00, 7019 14 00 and 7019 15 00) became 23.0% for the CNBM group (Jushi and Taishan), 17.2% for Jiangsu Changhai, 20.5% for CPIC and 23.0% for all others from 26 November 2025 [official] [S30]. The countervailing duty on the same products was reset at 10.2%, 5.8% and 9.7% respectively [official] [S31]. The Commission estimated Chinese overcapacity at more than 1 million tonnes, possibly above 2 million [official] [S30].

The overseas plants are now covered too. From 15 April 2026 the EU levies anti-dumping duty of 11.8% on CPIC Abahsain Fiberglass in Bahrain, 11.0% on Jushi Egypt and 15.3–25.4% on two Thai producers, with the scope corrected in June 2026 to include rovings and mats as well as chopped strands [official] [S32] [S33]. A countervailing duty of 13.1% on Egyptian glass fiber was renewed in September 2026 [official] [S34]. Fabrics carry separate measures: 34.0–69.0% anti-dumping duty for China and 33.1% for Egypt, extended to imports consigned from Morocco and Türkiye, plus 17.0–30.7% countervailing duty for China and 10.9% for Egypt [official] [S35] [S36].

In the United States, rovings (HTS 7019.12) carry 4.8% MFN duty, chopped strands 4.9%, mats 4.3% and woven fabrics 6.0–7.3% [official] [S37]. All these lines sit on the Section 301 list subject to an additional 25% under heading 9903.88.03, and heading 9903.05.31 adds a further 12.5% on Chinese products in the 2026 schedule [official] [S38]. There is no US anti-dumping order on glass fiber itself; the only recent US case on a glass-fiber product is fiberglass door panels, with final dumping margins of 41.82–147.85% and subsidy rates of 58.50–186.46% announced in June 2026 [official] [S39]. Jushi also reports 35.75% Turkish anti-dumping duty on Chinese roving, a proposed 40–50% Indian duty pending finance-ministry approval, a Brazilian investigation due to close by February 2027, and China's cut of the export VAT rebate on most glass fiber from 13% to 9% in November 2024 [company] [S1].

Row of container gantry cranes at a European deep-sea terminal at dusk
Container cranes at the Port of Antwerp. Chinese glass fiber enters the EU under CN 7019 11 to 7019 15 at 17.2 to 23.0% anti-dumping duty plus 5.8 to 10.2% countervailing duty; Chinese-owned plants in Egypt, Bahrain and Thailand now carry their own duties. [S30] [S31] [S32] Photo: Container cranes at the MPET- MSC PSA European Terminal in Port of Antwerp (Kieldrecht, Belgium) during the sunset civil twilight (DSCF3901) by Trougnouf. CC BY 4.0, via Wikimedia Commons.
Table 6. Duties on Chinese glass fiber and fabrics, November 2026
Market and productMeasureRateLegal basisApplies from
EU, rovings, chopped strands, mats from ChinaAnti-dumpingCNBM group 23.0%; Jiangsu Changhai 17.2%; CPIC 20.5%; others 23.0%Reg. (EU) 2025/233726 Nov 2025
EU, same products from ChinaCountervailingCNBM 10.2%; Changhai 5.8%; CPIC 9.7%; others 10.2%Reg. (EU) 2025/232826 Nov 2025
EU, same products from Bahrain, Egypt, ThailandAnti-dumpingCPIC Bahrain 11.8%; Jushi Egypt 11.0%; Thailand 15.3–25.4%Regs. (EU) 2026/831 and 2026/137115 Apr 2026
EU, same products from EgyptCountervailing (expiry review)13.1%Reg. (EU) 2026/210724 Sep 2026
EU, woven and stitched fabrics from ChinaAnti-dumping (expiry review)Jushi and Taishan group 69.0%; PGTEX 37.6%; Annex II firms 34.0%; others 69.0%Reg. (EU) 2026/120310 Jun 2026
EU, same fabrics from ChinaCountervailing (expiry review)Jushi and Taishan group 30.7%; PGTEX 17.0%; Annex I firms 24.8%; others 30.7%Reg. (EU) 2026/192811 Aug 2026
US, rovings 7019.12MFN + Section 301 + China surcharge4.8% + 25% + 12.5%HTSUS 2026 rev. 22; 9903.88.03; 9903.05.31in force
US, fabrics 7019.61–7019.69MFN + Section 301 + China surcharge6.0–7.3% + 25% + 12.5%HTSUS 2026 rev. 22in force
Türkiye, roving and mat from ChinaAnti-dumping35.75%Reported by Jushisince 18 Oct 2022
India, roving and mat from ChinaProposed anti-dumping40–50%DGTR final finding, July 2025 (reported by Jushi)pending approval

Source: EUR-Lex Official Journal texts; USITC HTS; China Jushi 2025 annual report. Verify the live rate and the TARIC additional code on the invoice before quoting a landed price.

8. Quality risks with Chinese glass fiber and the acceptance tests that catch them

Most quality failures with Chinese glass fiber are identity failures, not chemistry failures. The common ones are a medium-alkali (C-glass) or generic E-glass roving delivered against an E-CR order, a sizing for polyester shipped into an epoxy or polyurethane line, lots from two furnaces mixed on one pallet, a trader relabeling a mill product, and moisture pickup in humid sea freight. Jushi's own report notes that medium-alkali yarn is still produced in China for traditional markets [company] [S1]. In the EU there is also a customs risk: individual duty rates apply only if the invoice carries the producer declaration and TARIC additional code required by the regulation; otherwise the 'all other imports' rate is charged [official] [S32].

Acceptance testing is cheap compared with a failed run. The incoming checks are linear density, LOI, moisture, filament diameter and strand tensile strength, each against values written into the purchase order. Published reference values give the scale: 3B's E-CR roving lists 0.40% size solids and a 0.20% maximum moisture, HiPer-tex 0.4–0.6% sizing, Taishan's rovings 0.55% LOI, and Thomason's review a 0.5–1.5% LOI range for commercial products [company] [S14] [S16] [S18] [peer-reviewed] [S22]. For strength, an E-CR roving should reach 2,200–2,700 MPa in an ASTM D2343 strand test and a high-modulus wind roving 2,800–3,500 MPa [company] [S14] [S7].

The laminate check closes the loop. A UD epoxy laminate at 55% fiber volume should give about 44 GPa and 980 MPa with E-CR roving, 49–52 GPa with E7 or E8, and 54–55 GPa with E9; Jushi's acid-immersion data show boron-free grades retaining 99.6–99.9% of strength after 24 hours in 10% HCl against 81.6% for standard E-glass, which is a quick screen for a mislabeled grade [company] [S15] [S8]. Retain samples from each lot, and ask for the plant, furnace and bushing line on the certificate so that a later deviation can be traced.

Table 7. Incoming acceptance tests for glass fiber roving and mat
PropertyMethodReference value from datasheetsWhat a failure usually means
Linear density (tex)ISO 1889 / GB/T 7690.1Nominal tex on the code; tolerance must be written into the orderWrong product, bushing wear or mixed lots
Loss on ignition (size content)ISO 1887 / GB/T 9914.20.40% (3B E-CR); 0.4–0.6% (HiPer-tex); 0.55% (Taishan); 0.5–1.5% typicalSizing change or wrong grade for the resin
MoistureISO 3344 / GB/T 9914.10.20% maximum (3B E-CR)Poor storage or humid transit; risk of voids and poor cure
Filament diameterISO 1888 / GB/T 7690.513–24 µm (Taishan); 16–24 µm (3B)Different bushing or product than ordered
Strand tensile strength and modulusASTM D2343 / GB/T 7690.3E-CR 2,200–2,700 MPa, 81 GPa; E8 3,100–3,500 MPa, 95–98 GPaWrong glass type or damaged strand
UD laminate tensionISO 527-5 at stated Vf (ISO 1172)E-CR 980 MPa, 44 GPa at Vf 55%; E9 1,380–1,500 MPa, 54–55 GPaPoor fiber-resin compatibility
Acid resistance screen24 h in 10% HCl at 23 °CBoron-free grades 99.6–99.9% retention vs 81.6% for E-glass (Jushi)Boron-containing glass delivered as E-CR
Mass per unit area (mats, fabrics)ISO 3374 / GB/T 9914.3Nominal g/m² on the orderUneven chopping or stitching

Source: Jushi E8 and E9 brochures; 3B SE 1010, SE 2020 and HiPer-tex datasheets; Taishan TDS via Revchem; Thomason (2019); SAMR registry for GB/T numbers.

9. Where Chinese glass fiber leads, and where it still lags

China leads on scale, furnace technology and high-modulus wind glass. Jushi claims leadership in large tank-furnace design, bushing design, oxy-fuel combustion, sizing and glass formulation [company] [S1], and the modulus ladder from E6 to E9 shows the result. Taishan has built five low-dielectric and low-expansion special fiber lines and sold 19.17 million meters of special fiber cloth in 2025, certified by leading domestic and overseas customers [company] [S3]. Chinese groups also produced 721,000 tonnes of yarn in overseas bases in 2025, up 8.6%, a direct response to trade measures [statistic] [S2].

The lag is in the highest-value niches. China imported only 104,100 tonnes of glass fiber and products in 2025 but paid USD 1.191 billion for them, up 32.9%, with thermoplastic chopped strand the largest import line [statistic] [S1] [S2]. That is an average of about USD 11,400 per tonne against about USD 1,460 per tonne for exports [estimate] [S1]. The gap says that some specialty sizings, ultra-fine yarns and qualified aerospace grades still come from abroad; it also says that a Chinese commodity roving competes on cost, while a Chinese specialty grade must be qualified like any new supplier.

Figure 8. Average unit value of China's glass fiber trade, 2025GetFRP estimate

↔ Scroll horizontally to see the full chart and data table.

Imports (104.1 kt, USD 1.191 bn)11,441 USD/t*Exports (1,949.6 kt, USD 2.852 bn)1,463 USD/t*

Source: GetFRP calculation from CGFIA trade data in the Jushi and CPIC 2025 annual reports. * Value divided by volume [estimate]. Product mix differs sharply between the two flows.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Imports (104.1 kt, USD 1.191 bn)11441USD/tGetFRP estimate——
—Exports (1,949.6 kt, USD 2.852 bn)1463USD/tGetFRP estimate——

10. RFQ checklist for glass fiber roving, mat and fabrics from China

A good glass fiber RFQ names the product precisely enough that two suppliers quote the same thing, and states the evidence that will decide acceptance. The list below converts this report into requirements with values. It assumes a thermoset buyer; for thermoplastic compounding replace the resin and test items with the compounder's own.

  • 1. Glass type: state E-CR (boron-free, ASTM D578) or a named high-modulus grade such as E7, E8 or E9, and prohibit substitution with boron-containing E-glass or medium-alkali glass.
  • 2. Product code and plant: name the manufacturer code (for example 386T, 332, 308H), the producing plant and, for EU imports, the producer's TARIC additional code; require 60 days' written notice of any change in sizing, plant or bushing line.
  • 3. Tex and filament diameter: for example 2400 tex at 17 or 24 µm for pultrusion, with the tolerance band written in the order and tested per ISO 1889 and ISO 1888.
  • 4. Resin system: state UP, VE, epoxy (with amine or anhydride cure) or PU, and the process (pultrusion, winding, infusion, SMC), so the sizing matches.
  • 5. Size content and moisture: specify the LOI target and band per ISO 1887 (the rovings cited in this report sit at 0.40–0.60%) and moisture at or below 0.20% per ISO 3344 at delivery.
  • 6. Strand properties: require an ASTM D2343 report per lot, with at least 2,200 MPa and 80 GPa for E-CR or 2,800 MPa and 89 GPa for E7-class wind roving.
  • 7. Laminate evidence: for structural or wind use, a UD laminate report per ISO 527-5 and ISO 14126 at a stated fiber volume (55–60%), resin and cure.
  • 8. Mats and fabrics: areal weight and tolerance per ISO 3374, binder type (emulsion or powder) for CSM, roving code inside every fabric, stitching yarn and fiber orientations.
  • 9. Packaging and storage: bobbin weight, pallet pattern, stretch wrap and desiccant for sea freight, and acclimatization for 24 hours before use as 3B recommends for its rovings.
  • 10. Commercial terms: quote with HS code, Incoterm, tax basis (Chinese domestic price indexes are VAT-inclusive; export quotes are not) and the duty stack at destination, and price over a fixed index window rather than a single spot quote.

How to read the evidence tags

Statistic: association, customs or price-agency data. Company: annual reports, datasheets and company statements. Official: regulations, tariff schedules and standards registries. Peer-reviewed: journal papers. Media: broker and press reports. Estimate: GetFRP calculations, always with inputs shown. Figures from different series are never added together.

Frequently asked questions

Who are the largest glass fiber manufacturers in China?

China Jushi, Taishan Fiberglass (Sinoma Science and Technology) and Chongqing Polycomp International (CPIC). In 2025 they sold 3.20, 1.37 and 1.18 million tonnes of glass fiber and products respectively, and together hold about 70% of Chinese capacity. Shandong Fiberglass is the next large tank-furnace producer.

How much does fiberglass roving cost in China in 2026?

Standard 2400 tex E-glass direct roving averaged RMB 3,730–3,790 per tonne, delivered and VAT inclusive, between June and mid-September 2026 according to Sublime China Information, about 3–6% above a year earlier. High-modulus wind roving, thermoplastic chopped strand and fabrics cost more; exports exclude VAT and add freight and duty.

What is the difference between E-glass and E-CR (E6) glass fiber?

E-CR is boron-free and more acid-resistant. Jushi's data show E6 with an 81 GPa glass modulus against 74 GPa for its reference E-glass, and 99.6–99.9% strength retention after 24 hours in 10% HCl against 81.6% for E-glass. Most Chinese direct roving sold for pultrusion and pipe is now E-CR type.

What does 2400 tex mean, and which tex is used for pultrusion?

Tex is grams per kilometer, so 2400 tex roving weighs 2.4 g per meter. Pultrusion uses 2,400 to 9,600 tex direct roving with 16–32 µm filaments, filament winding 1,200 to 4,800 tex, and fabrics 600 to 2,400 tex. The code must also name the sizing for the resin.

What is the EU anti-dumping duty on Chinese glass fiber?

Since 26 November 2025, 23.0% for the Jushi and Taishan group, 20.5% for CPIC, 17.2% for Jiangsu Changhai and 23.0% for others, plus a countervailing duty of 5.8–10.2%. Woven and stitched glass fabrics carry 34.0–69.0% anti-dumping duty plus 17.0–30.7% countervailing duty.

Is there a US anti-dumping duty on Chinese fiberglass roving?

No anti-dumping order covers glass fiber roving. Rovings under HTS 7019.12 pay 4.8% MFN duty plus 25% Section 301 duty and a 12.5% China surcharge in the 2026 schedule. The US case on fiberglass door panels covers finished doors, not reinforcement.

Is Chinese high-modulus glass fiber as good as Western grades?

On published data, yes for modulus: Jushi E8 and E9 list 95 and 101 GPa against 86–89 GPa for 3B HiPer-tex and about 86 GPa for S-2 Glass. S-2 still leads on strain to failure. The deciding evidence is a laminate test with your resin, not the brochure.

Which tests should I run on incoming glass fiber?

Linear density (ISO 1889), LOI (ISO 1887), moisture (ISO 3344, at or below about 0.20%), filament diameter (ISO 1888) and an impregnated strand tensile test (ASTM D2343). For structural parts add a UD laminate test per ISO 527-5 at a stated fiber volume.

Sources and scope

Figures were cross-checked against primary documents where available; secondary citations are marked in each scope note. Company figures are reported as disclosed by the companies themselves. This note is an independent market assessment and not investment advice.

  1. [S1]China Jushi Co., Ltd., 2025 annual report (SSE 600176), published 20 March 2026

    CGFIA 2025 statistics (yarn 8.43 Mt, yarn by type, consumption, exports 1.9496 Mt and USD 2.852 bn, imports 104.1 kt and USD 1.191 bn, special e-glass projects RMB 13.38 bn); Jushi sales 3.2026 Mt, revenue, margins, bases, projects; concentration statements; platinum-rhodium accounting; trade measures in the US, EU, Türkiye, India and Brazil; VAT rebate cut.

  2. [S2]Chongqing Polycomp International (CPIC), 2025 annual report (SZSE 301526), published 23 April 2026

    Tank-furnace yarn 8.12 Mt; 860 kt new capacity from 10 furnaces; exports by product; overseas-base output 721 kt; industry profit RMB 11 bn; CPIC sales 1,176,994 t and revenue RMB 8.658 bn; wind share above 25%; 100 GPa glass; cold-repair warning.

  3. [S3]Sinoma Science and Technology, 2025 annual report (SZSE 002080), published 20 March 2026

    Taishan Fiberglass: 1.37 Mt sold, capacity above 1.7 Mt/yr, revenue RMB 8.9 bn, average price +14%, yarn and product margins, five low-Dk and low-CTE lines, 19.17 million meters of special fiber cloth.

  4. [S4]Guojin Securities, China Jushi H1 2026 results note (21 August 2026)

    SCI Q2 2026 roving average RMB 3,781/t; Jushi H1 roving sales 1.7004 Mt; one new furnace and two cold repairs in H1 2026; 7628 cloth Q1 average. Broker report citing price-agency data.

  5. [S5]NetEase industry review of the glass fiber cycle citing Sublime China Information and CGFIA (13 October 2026)

    2400 tex roving averages at end-June and mid-September 2026; G75 yarn and 7628 cloth prices; mid-2026 capacity 9.3 Mt with 8.65 Mt in production; H1 2026 output and demand; Caitong price-cycle points. Secondary summary of agency data.

  6. [S6]China Jushi, R&D core: E6, E7, E8 and E9 glass

    E6 as E-CR glass under ASTM D578; E7, E8 and E9 positioning; E9 modulus above 100 GPa. Company statements.

  7. [S7]China Jushi, E8 high-modulus glass fiber brochure

    E6, E7, E8 density, CTE, softening point, glass modulus, dielectric constant; ASTM D2343 strand data; UD infusion laminate data at about 54% Vf. Company data, marked preliminary.

  8. [S8]China Jushi, E9 ultra-high-modulus glass fiber brochure

    E, E7, E8, E9 glass modulus (74/90/95/101 GPa), CTE, softening point; strand and UD laminate data at 55% Vf; chemical retention tests. Company data.

  9. [S9]China Jushi, fiberglass products for continuous profiles

    Pultrusion codes 276, 310H, 312, 312T, 316H, 332, 386T, 386H and panel codes with applications.

  10. [S10]China Jushi, fiberglass products for compression molding

    SMC codes 410J, 440, 440A, 442K, 448, 456, 458 and BMC codes 552B, 558, 562A.

  11. [S11]China Jushi, fiberglass products for pipes

    Filament-winding codes 162, 162K, 162E, 306B, 308, 308H, 308S, 310S, 386T, 386H with resin and cure compatibility.

  12. [S12]China Jushi, fiberglass products for fabrics and mats

    Wind fabric roving codes 320, 380, 386T, 390, 396, 398 by process and resin; mat and lightweight fabric rovings.

  13. [S13]China Jushi, fiberglass mats and woven rovings

    Emulsion CSM E01, E10, E20; powder CSM P02, P20; woven roving EWR270 to EWR1600 in plain and twill.

  14. [S14]3B, SE 1010 direct roving datasheet

    E-CR glass per ASTM D578 and ISO 2078; 600–4,800 tex at 17 and 24 µm; size solids 0.40%; moisture max 0.20%; strand 2,200–2,500 MPa and 81 GPa; density 2.62.

  15. [S15]3B, SE 2020 direct roving for epoxy resins datasheet

    Tex and filament ladder; CTE 6.1; UD laminate at Vf 55%: 980 MPa, 44 GPa, 61 MPa transverse, 59 MPa ILSS, fatigue 255 MPa at 10⁶ cycles R = −1.

  16. [S16]3B, HiPer-tex W 2020 rovings datasheet

    R-glass classification; strand 2,700–2,900 MPa, 86–89 GPa, 3.1–3.3% strain; density 2.58; sizing 0.4–0.6%; UD laminate 1,280 MPa and 48 GPa at Vf 56%; storage advice.

  17. [S17]Johns Manville, reinforcement fiberglass product selector guide

    StarRov tex versus filament diameter; resin compatibility of sizings 090 (UP/VE/epoxy/PU) and 086; process mapping.

  18. [S18]Taishan Fiberglass, E-glass single-end roving technical data sheet (distributor copy, Revchem)

    Grades T910 to T980 with resin compatibility (UP/VE, multi-resin, epoxy), 13–24 µm, LOI 0.55%, silane sizing. Distributor-hosted manufacturer datasheet.

  19. [S19]AGY, S2 Glass fiber rovings product information (2025)

    Strength and modulus gains versus E-glass at the same Vf, 20% lower dielectric constant, softening point; binder codes and resin compatibility.

  20. [S20]AGY, L-Glass product information

    E-glass reference values: dielectric constant 6.1 and loss tangent 0.004 at 10 GHz, density 2.54, CTE 54 × 10⁻⁷/°C, modulus 72 GPa.

  21. [S21]Hexcel, HexForce technical fabrics handbook

    E-glass and S-2 Glass compositions and US-unit fiber property table (converted to SI by GetFRP). The handbook's metric table contains inconsistencies and was not used.

  22. [S22]Thomason, Glass fibre sizing: a review, Composites Part A 127 (2019) 105619, open-access version

    LOI range 0.5–1.5% for commercial products; film formers 70–90% of size solids; role of silane coupling agents. Peer-reviewed.

  23. [S23]SAMR national standards registry: GB/T 18369-2022 Glass fiber roving

    Issue 14 October 2022, in force 1 May 2023; full text downloadable.

  24. [S24]SAMR national standards registry: GB/T 7690.1-2013 Reinforcements, test method for yarns, linear density

    Adopted from an international standard; in force 1 August 2014. The GB/T 7690 series also covers breaking force and filament diameter.

  25. [S25]SAMR national standards registry: GB/T 9914.2-2013 Combustible-matter content for glass fiber

    LOI test, adopted from an international standard; companion parts 9914.1 (moisture) and 9914.3 (mass per unit area).

  26. [S26]SAMR national standards registry: search results for glass fiber roving standards

    GB/T 18370-2014 woven roving fabric, GB/T 36494-2018 roving static, GB/T 26734-2011 sizing solubility, GB/T 14208.1-2009 roving-reinforced rods.

  27. [S27]SAMR national standards registry: search results for glass fiber stitched fabrics

    GB/T 25040-2010 glass fiber stitched fabrics (adopted).

  28. [S28]SAMR national standards registry: search results for chopped strand mat

    GB/T 17470-2007 chopped strand mat and continuous filament mat.

  29. [S29]SAMR national standards registry: search results for glass fiber product codes

    GB/T 4202-2023 glass fiber product codes, in force 1 June 2024.

  30. [S30]Commission Implementing Regulation (EU) 2025/2337 amending the anti-dumping duty on continuous filament glass fibre products from China

    Product scope and CN codes; AD rates 23.0%, 17.2%, 20.5%, 23.0%; measure history since 2011; overcapacity findings; ISO 1887 LOI threshold.

  31. [S31]Commission Implementing Regulation (EU) 2025/2328 amending the countervailing duty on continuous glass fibre products from China

    CVD rates 10.2% (CNBM), 5.8% (Jiangsu Changhai), 9.7% (CPIC), 10.2% others after a partial interim review limited to injury.

  32. [S32]Commission Implementing Regulation (EU) 2026/831, anti-dumping duty on glass fibre products from Bahrain, Egypt and Thailand

    Rates 11.8% (CPIC Abahsain, Bahrain), 11.0% (Jushi Egypt), 15.3–25.4% (Thailand); invoice declaration requirement for individual rates.

  33. [S33]Commission Implementing Regulation (EU) 2026/1371 correcting Regulation 2026/831

    Extends the corrected scope to rovings and mats as well as chopped strands, applying from 15 April 2026.

  34. [S34]Commission Implementing Regulation (EU) 2026/2107, countervailing duty on glass fibre products from Egypt (expiry review)

    CVD of 13.1% on Jushi Egypt and all other Egyptian imports, renewed 22 September 2026.

  35. [S35]Commission Implementing Regulation (EU) 2026/1203, anti-dumping duty on woven and stitched glass fibre fabrics from China and Egypt (expiry review)

    AD rates 69.0%, 37.6%, 34.0% for China and 33.1% for Egypt; extension to Morocco and Türkiye consignments; CN scope.

  36. [S36]Commission Implementing Regulation (EU) 2026/1928, countervailing duty on woven and stitched glass fibre fabrics from China and Egypt (expiry review)

    CVD rates 30.7%, 17.0%, 24.8% for China and 10.9% for Egypt, from August 2026.

  37. [S37]USITC, Harmonized Tariff Schedule search, heading 7019

    General (MFN) rates for 7019.11 (4.9%), 7019.12 (4.8%), 7019.14 and .15 (4.3%), fabrics 7019.61 to 7019.69 (6.0–7.3%).

  38. [S38]USITC, HTSUS chapter 99, 2026 revision 22

    US note 20(f) listing 7019 lines under heading 9903.88.03 (25%); heading 9903.05.31 adding 12.5% on products of China under US note 52.

  39. [S39]US International Trade Administration, final determinations in the AD and CVD investigations of fiberglass door panels from China (June 2026)

    Dumping margins 41.82–147.85%; subsidy rates 58.50–186.46%; finished-product case, not reinforcement.

  40. [S40]Owens Corning completes sale of glass reinforcements business to Praana Group (1 May 2026)

    Completion date and USD 645 million enterprise value.

  41. [S41]China Jushi, product code explanation for direct roving

    Code structure E6 DR 24-2400-386T: glass type, direct roving, filament diameter, tex, product code.

Image provenance and usage terms appear in each caption; see image credits. Submit a source correction.

Continue your supplier research

  1. Chongqing International Composite Materials Co., Ltd. logo
    Verified
    Process
    Continuous glass-fiber drawing
    Standard
    AS9100D
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    Chongqing Polycomp International Corporation (CPIC), established in 1991, is a Yuntianhua Group company focused on the R&D, production and sale of glass fiber and composite materials. CPIC's official website lists production bases in Chongqing, Zhuhai and Changzhou in China as well as overseas operations, supported by sales subsidiaries in North America, Europe and Hong Kong, China.

    Product categories
    Thermosetting and thermoplastic direct rovingAssembled fiberglass rovingThermoplastic, BMC and wet chopped strands
  2. China Jushi Co., Ltd. logo
    China Jushi Co., Ltd.
    Tongxiang, Zhejiang, China
    Process
    Tank-furnace glass fiber drawing
    Standard
    ISO 9001
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.

    Product categories
    Fiberglass yarn, roving and reinforcement fabricsChopped strand mat and woven rovingFiberglass products for thermoplastics
    Websitejushi.com
  3. Taishan Fiberglass Co., Ltd. logo
    Taishan Fiberglass Co., Ltd.
    Tai'an, Shandong, China
    Process
    Tank-furnace glass fiber drawing
    Standard
    ISO 9001
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    Taishan Fiberglass (CTG) was established in 1997 and focuses on fiberglass and fiberglass-reinforced products. Its official English website describes a diversified product portfolio for pipes and tanks, wind energy, open molding, pultrusion, panels, molding, mats and fabrics, thermoplastics, and electronic and industrial yarns.

    Product categories
    E-glass fiberglass roving and yarnChopped strand mats and fiberglass fabricsElectronic and industrial fiberglass yarns
    Websitectgf.com

Request comparable supplier responses

Send the specification, quantity and destination with the evidence you need.

Submit RFQ