GetFRP

Market research · Market sizing method

Composite Materials Market Size 2026: Tonnes, Dollars and China's Share

The global composites market was about 13.3 to 15.9 million tonnes in 2025 on JEC's estimate, and consultancies put its value at USD 96 to 133 billion for 2025–2026; both are honest numbers for different boundaries. China produced 8.89 million tonnes of glass-fiber-reinforced plastic products in 2025 by its glass fiber association's count, which is why China's share swings from 30% to more than half depending on whose denominator you use. This report sets every published estimate beside its scope, unit and base year, and shows which segments drive tonnes and which drive dollars.

By GetFRP team · Published · Research cut-off 3 November 2026 · Editorial policy · 4 figures, 8 charts, 4 tables, 17 sources

Evidence tags:GetFRP estimateForecastStatisticStatistics, company disclosures, forecasts and estimates retain their stated scope.
A new wind turbine blade lying on the prairie between two cranes before installation near Hanna, Alberta
A wind turbine blade being rigged for installation. Wind is the largest single swing factor in composite tonnage: China's high-modulus wind glass yarn output rose 65.1% in 2025 and wind took about 100,000 t of carbon fiber worldwide [S3] [S10]. Photo: Wind turbine blades Hanna Alberta 1 by KenWalker. CC BY-SA 4.0, via Wikimedia Commons.

Key numbers at a glance

13.3–15.9 Mt
Global composites volume, 2025 (JEC lower and upper case)
13.2–15.7 Mt in 2024; spread is China uncertainty
GetFRP estimateJEC via AVK [S1]
USD 95.7–133.2 bn
Consultancy 'composites market' values, 2025–2026
Fortune 95.74 (2025), Grand View 112.4 (2025), Precedence 133.20 (2026)
Forecast[S12] [S11] [S13]
8.89 Mt
China glass-fiber-reinforced plastic products output, 2025
+18.5%; thermoset 4.51 Mt, thermoplastic 4.38 Mt
StatisticCGFIA [S3]
8.43 Mt
China glass fiber yarn output, 2025
+11.5%; high-modulus wind yarn +65.1%
StatisticCGFIA [S3]
2,281 kt
European composites production, 2025
−3%; 1,210 kt of it is short-fiber thermoplastics
StatisticAVK [S1]
224,510 t
Global carbon fiber demand, 2025
+43.8%; carbon fiber composites 366.8 kt worth USD 30.35 bn
StatisticSail [S10]
12.6% vs 60.8%
Aerospace share of carbon fiber composites: volume vs revenue, 2025
the clearest volume-versus-value split in the data
StatisticSail [S10]
30% vs 41.4%
China's share of global composites, 2021, by two sources
JEC 3.6 of 12.1 Mt; CCIA 6.0 of about 14.5 Mt
StatisticJEC Observer and CCIA [S6] [S7]

1. How big is the composite materials market?

By tonnage, the best global anchor is JEC's estimate as reported by the German association AVK: the composites market was between 13.3 and 15.9 million tonnes in 2025, after 13.2 to 15.7 million tonnes in 2024, implying growth of about 1% [estimate] [S1]. The gap between the two cases is not noise; AVK attributes it to a high degree of uncertainty about additional production volumes in China [official] [S1]. A year earlier the same channel carried a single figure of 13.5 million tonnes for 2024 with a warning that optimistic China estimates could push it significantly higher [official] [S2].

By value, consultancies publish numbers 2.6 to 3.6 times JEC's materials-level value of about USD 37 billion for 2021, because they count at a wider boundary and in a later year [estimate: 95.74 ÷ 37; 133.20 ÷ 37]. Grand View Research values the market at USD 112.4 billion in 2025, growing 8.4% a year to USD 212.1 billion in 2033 [forecast] [S11]. Fortune Business Insights puts 2025 at USD 95.74 billion with a 7.90% growth rate to USD 189.62 billion in 2034, and explicitly includes ceramic and metal matrix composites [forecast] [S12]. Precedence Research starts from USD 133.20 billion in 2026 and grows 5.97% a year to USD 224.28 billion in 2035 [forecast] [S13]. For the same year, 2026, Fortune and Precedence differ by 29% [estimate: 133.20 ÷ 103.02 − 1].

The table below is the register this report works from. Use it the way a buyer or analyst should use any market figure: read the unit, the boundary and the year before the number, and compare like with like.

Table 1. Published composites market estimates, with unit, boundary and base year
Publisher (edition)Metric and yearValueUnitBoundary and scopeEvidence
JEC via AVK (March 2026)Global composites volume, 202513.3–15.9million tonnesFiber-reinforced polymer composites; lower and upper case on Chinaestimate (association)
JEC via AVK (March 2025)Global composites volume, 202413.5million tonnesSame; later revised to a 13.2–15.7 Mt rangeestimate (association)
JEC Observer by Estin & Co, via CCIA (March 2022)Global composites, 2021about 12 (12.1); about USD 37 bnmillion tonnes; USDComposite materials consumed in parts; parts output valued above USD 100 bnestimate (association)
CCIA (August 2022)Global composites, 2021about 14.5million tonnesAVK's ex-China 8.5 Mt plus CCIA's China 6.0 Mtestimate (association)
AVK (March 2026)European composites production, 20252,281kilotonnesIncludes 1,210 kt short-fiber thermoplasticsstatistic
Lucintel via CCIA (November 2026)Regional consumption, 2025North America 3.4; Europe 2.2; Southeast Asia 0.7million tonnesComposite consumption by regionforecast (consultancy)
China Glass Fiber Industry Association (February 2026)China GFRP products output, 20258.89million tonnesDerived from domestic yarn consumption; thermoset plus thermoplasticstatistic
CCIA (August 2026)China composites output, 2025above 8.1million tonnesAll composites; method not statedstatistic
Guangzhou Sail Carbon Fiber (April 2026)Carbon fiber composites, 2025366.8 kt; USD 30.35 bnkilotonnes; USDResin-based carbon fiber composites onlystatistic
Grand View Research (June 2026)Composites market, 2025112.4USD billionGlass, carbon and other fiber; 46.6% Asia-Pacificforecast
Fortune Business Insights (October 2026)Composites market, 202595.74USD billionPolymer, ceramic and metal matrix composites; 42.2% Asia-Pacificforecast
Precedence Research (2026)Composites market, 2026133.20USD billionNot detailed on the public pageforecast

Source: AVK [S1] [S2]; CCIA [S6] [S7] [S8] [S9]; CGFIA [S3]; Sail [S10]; Grand View [S11]; Fortune [S12]; Precedence [S13]. Values are never summed across rows.

2. Why composite market estimates differ several-fold

Every composites figure measures one of four nested boundaries. The innermost is reinforcing fiber, sold by the tonne. Around it sit intermediates: fabrics, mats, prepreg, molding compounds and resin systems. Composite materials add the resin and filler mass to the fiber; finished parts add conversion, design, tooling and margin. JEC's own description captures two of these at once: the industry's parts are valued above USD 100 billion, while the market quantified at the level of composite materials consumed was about 12 million tonnes and about USD 37 billion in 2021 [estimate] [S6].

Moving outward changes the number fast. In carbon fiber, Sail counts 224,510 t of fiber worth USD 5.44 billion in 2025, but 366.8 kt of resin-based carbon fiber composites worth USD 30.35 billion [statistic] [S10]. The same source therefore implies about USD 24/kg for fiber and USD 83/kg for composite [estimate: 5,441.8 ÷ 224,510; 30,350 ÷ 366,800]. In glass fiber, China's association turns 3.797 Mt of thermoset yarn and 1.565 Mt of thermoplastic yarn consumed into 8.89 Mt of products, an implied glass content of about 60% [estimate: (3.797 + 1.565) ÷ 8.89] [S3].

Scope switches inside a boundary matter just as much. AVK's European total includes 1,210 kt of short-glass-fiber thermoplastics, 53% of the market, which many analysts do not count as composites at all [statistic] [S1]; without them Europe is about 1,071 kt [estimate: 2,281 − 1,210]. Fortune includes ceramic and metal matrix composites [forecast] [S12]. JEC's lower and upper cases differ by 2.6 Mt on China alone [estimate: 15.9 − 13.3] [S1].

How to read the evidence tags

Statistic: association, government or customs data and the carbon fiber series from Sail. Estimate (association): JEC and CCIA figures that their authors describe as estimates or scenarios. Forecast: every consultancy figure, including its estimates for past years. Estimate (GetFRP): our arithmetic, always with inputs shown. Different series are compared, never added.

Production hall of a continuous-filament glass fiber plant in Genk, Belgium, with furnace piping and walkways
Inside a continuous-filament glass fiber plant in Genk, Belgium. Fiber is the narrowest market boundary: China alone produced 8.43 Mt of glass fiber yarn in 2025, and the association then estimates 8.89 Mt of glass-fiber-reinforced plastic products from yarn consumption [S3]. Photo: EU2024BE 240208 Informal meeting of competitiveness ministers (internal market and industry) Fibreglass Genk - 265 by Belgian Presidency of the Council of the European Union / Julien Nizet. CC BY 2.0, via Wikimedia Commons.

↔ Scroll horizontally to see the full diagram.

Four nested boundaries of the composites market and the series that measure each oneFour nested boxes. The innermost is reinforcing fiber, sold by the tonne. It sits inside intermediates such as fabrics, prepreg, molding compounds and resin systems. Those sit inside composite materials, where resin and filler mass is added to the fiber mass. The outermost box is finished composite parts and products, which adds conversion labor, design, tooling and margin and is usually reported in money. On the right, arrows link each boundary to the kind of published series that measures it: fiber output in tonnes, intermediate consumption in tonnes, composites volume in tonnes from JEC, AVK, Lucintel and the China glass fiber association, and consultancy revenue in US dollars. Below, a strip lists the scope switches that make estimates differ: unit, boundary, whether short-fiber thermoplastics, ceramic and metal matrix composites, or China are included, and whether the figure is a measurement or a forecast.Each boundary contains the one inside it: published figures grow as the box widens, so they must never be added together4. Finished composite parts and productsadds conversion labor, design, tooling, fittings and margin; sold in value,rarely in tonnes3. Composite materials (fiber plus matrix)tonnes of laminate, compound or profile; resin and filler mass included2. Intermediatesfabrics, mats, prepreg, SMC and BMC compound, glass-filled pellets, resinsystems1. Reinforcing fiberglass yarn and roving, carbon fiber tow; sold by the tonneReading outward: mass grows at each step, value grows faster than massWho measures which box, and in what unit1Fiber output or demandChina glass fiber association yarn output; carbon fiber demandseriestonnes, sometimes fiber sales value2Intermediate productsglass fiber association consumption of mats and fabrics;company sales volumestonnes3Composites volumeJEC global scenarios, AVK Europe, Lucintel regions, China GFRPproducts outputtonnes of composite4'Composites market' revenueconsultancy reports; carbon fiber composites revenue seriesUS dollars, often forecastScope switches that move a headline figure several-foldtonnes or dollarswhich box is countedshort-fiber thermoplastics in or outceramic and metal matrix in or outChina fully counted or notmeasured year or forecast
Figure 1. Four nested market boundaries and the series that measure each. Carbon fiber shows the jump between boxes: 224,510 t of fiber worth USD 5.44 bn became 366.8 kt of composites worth USD 30.35 bn in 2025 [statistic] [S10]; JEC valued 2021 composite materials at about USD 37 bn and the parts made from them at more than USD 100 bn [estimate] [S6]. Schematic drawn by GetFRP; not to scale.

3. Composites by volume: JEC, AVK and Lucintel compared

Three public tonnage views exist, and they agree better on direction than on level. JEC's 2021 regional split, published through CCIA, put China at 30% or 3.6 Mt of 12.1 Mt, North America at 25% or 3.0 Mt, Europe and the rest of Asia-Pacific at 19% or 2.28 Mt each, Middle East and Africa at 4% and South America at 3% [estimate] [S6]. Lucintel's 2025 figures, also republished by CCIA, put North America at 3.4 Mt, Europe at 2.2 Mt and Southeast Asia at 0.7 Mt, with consumption of about 1 kg per person in Southeast Asia against nearly 9 kg in the United States [forecast] [S9].

AVK is the only one with a long published series, and it shows Europe shrinking. European production peaked at 3,005 kt in 2018 in AVK's chart, recovered to 2,910 kt in 2021 and fell every year since to 2,281 kt in 2025, a decline of 5.9% a year since 2021 [statistic; estimate for the rate] [S1]. Europe's share of the global market is 17% in JEC's lower case and 14% in the upper case [estimate] [S1]. AVK also revises its own past: the March 2025 report gave 2,416 kt for 2024 and 2,559 kt for 2023, which the March 2026 report shows as 2,351 kt and 2,496 kt [statistic] [S2] [S1].

Use these numbers to size regions, not suppliers. A 3.4 Mt North American market includes short-fiber compounds, boat hulls, bathtubs and wind blades; a pultruded profile buyer's addressable market is a small part of it. Europe's pultrusion line was 46 kt in 2025, about 2% of the European total [statistic; estimate for the share] [S1].

Figure 2. Published composites volume estimates by scopeGetFRP estimate

↔ Scroll horizontally to see the full chart and data table.

JEC upper, global 202515.90 MtCCIA, global 202114.50 MtJEC lower, global 202513.30 MtJEC Observer, global 202112.10 MtCGFIA, China GFRP 20258.89 MtCCIA, China 20258.10 MtLucintel, N. America 20253.40 MtAVK, Europe 20252.28 MtLucintel, Europe 20252.20 MtLucintel, SE Asia 20250.70 MtSail, CF composites 20250.37 Mt

Source: AVK [S1]; CCIA [S6] [S7] [S8] [S9]; CGFIA [S3]; Sail [S10]. Mixed boundaries by design: global, regional and China figures and one material family. The bars show scale and must not be added; the CCIA 2021 global figure itself combines two sources.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—JEC upper, global 202515.9MtGetFRP estimate——
—CCIA, global 202114.5MtGetFRP estimate——
—JEC lower, global 202513.3MtGetFRP estimate——
—JEC Observer, global 202112.1MtGetFRP estimate——
—CGFIA, China GFRP 20258.89MtGetFRP estimate——
—CCIA, China 20258.1MtGetFRP estimate——
—Lucintel, N. America 20253.4MtGetFRP estimate——
—AVK, Europe 20252.28MtGetFRP estimate——
—Lucintel, Europe 20252.2MtGetFRP estimate——
—Lucintel, SE Asia 20250.7MtGetFRP estimate——
—Sail, CF composites 20250.37MtGetFRP estimate——
Figure 3. European composites production, 2016–2025Statistic

↔ Scroll horizontally to see the full chart and data table.

01,2502,5003,7505,0002,75620162,90120173,00520182,85120192,45620202,91020212,72420222,49620232,35120242,2812025kt

Source: AVK Composites Market Report 2026, Figure 5 and Table 1 [S1]. 2016–2019 read from the chart labels; 2020–2025 from Table 1. Includes short-fiber thermoplastics (1,210 kt in 2025). Latest years are revised in later editions.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—20162756ktStatistic——
—20172901ktStatistic——
—20183005ktStatistic——
—20192851ktStatistic——
—20202456ktStatistic——
—20212910ktStatistic——
—20222724ktStatistic——
—20232496ktStatistic——
—20242351ktStatistic——
—20252281ktStatistic——

4. Composites by value: consultancy forecasts and what they count

Consultancy values are forecasts even when they describe a past year, because they are modeled from company revenues, trade data and price assumptions rather than counted. Their scopes differ in ways that are visible only in the segmentation. Grand View segments by fiber (glass fiber 58.5% of 2025 value, carbon fiber growing fastest at 9.3% a year), by process (lay-up 36.7%) and by application (automotive and transportation 21.0%), with Asia-Pacific at 46.6% [forecast] [S11]. Fortune's 42.2% Asia-Pacific share, USD 40.4 billion in 2025, sits inside a scope that also includes ceramic and metal matrix composites [forecast] [S12].

Association value data are rare and narrower. JEC's USD 37 billion for 2021 counts composite materials; its 'more than USD 100 billion' counts parts [estimate] [S6]. Sail's USD 30.35 billion counts only carbon fiber composites, up 15.6% in 2025 while their tonnage rose 38.6% [statistic] [S10]. China publishes no national composites revenue series; the CCIA's 2026 review of listed companies shows how value concentrates instead, with China Jushi at RMB 18.88 billion of 2025 revenue and RMB 3.285 billion of net profit, against RMB 5.43 billion of revenue and RMB 23 million of profit at Jilin Chemical Fiber [company] [S15].

Read consultancy pages for three things before using a number: the base year (several now quote 2026 rather than 2025), whether the figure is materials or parts, and which matrices are included. Grand View's own page shows inconsistencies between its summary and body on which segment grows fastest, a reminder that these are marketing summaries of paid reports [forecast] [S11].

Figure 4. Published value estimates by boundaryForecast

↔ Scroll horizontally to see the full chart and data table.

Precedence, 2026133.20 USD bnGrand View, 2025112.40 USD bnJEC parts, 2021 (floor)100.00 USD bnFortune incl. CMC/MMC, 202595.74 USD bnJEC materials, 202137.00 USD bnSail, CF composites 202530.35 USD bnSail carbon fiber, 20255.44 USD bn

Source: Precedence [S13]; Grand View [S11]; JEC Observer via CCIA [S6]; Fortune [S12]; Sail [S10]. Consultancy values are forecasts; JEC values are association estimates; Sail values are its market statistics. The JEC parts bar is a floor ('more than USD 100 bn'). Do not add bars.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Precedence, 2026133.2USD bnForecast——
—Grand View, 2025112.4USD bnForecast——
—JEC parts, 2021 (floor)100USD bnForecast——
—Fortune incl. CMC/MMC, 202595.74USD bnForecast——
—JEC materials, 202137USD bnForecast——
—Sail, CF composites 202530.35USD bnForecast——
—Sail carbon fiber, 20255.44USD bnForecast——

5. China's share and its 2018–2025 composites output

China's official-grade series comes from the China Glass Fiber Industry Association, which counts yarn output by product and estimates downstream glass-fiber-reinforced plastic (GFRP) output from domestic yarn consumption. In 2025 yarn output rose 11.5% to 8.43 Mt, and the association estimates GFRP products at 8.89 Mt, up 18.5%: 4.51 Mt thermoset (+24.1%) and 4.38 Mt thermoplastic (+13.5%) [statistic] [S3]. The series stood at 6.72 Mt in 2023 and 7.50 Mt in 2024 [statistic] [S5] [S4], and compounds at about 10.9% a year from 2018 [estimate: (8.89 ÷ 4.30)^(1/7) − 1, with 2018 back-calculated from the association's growth rates].

The 2025 jump was a wind and electronics year, not a broad recovery. High-modulus wind yarn rose 65.1% and electronic yarn 9.6%, while ordinary thermoset direct roving fell 9.8% and industrial yarn 2.4% as property and infrastructure investment kept falling [statistic] [S3]. China added 120 GW of wind and 318 GW of solar capacity in 2025 [official] [S17]. Exports eased: 1.95 Mt of glass fiber and products, down 3.6%, worth USD 2.85 billion [statistic] [S3].

China's share of the world depends on the denominator. JEC's 2021 split gave China 30% (3.6 Mt), while the CCIA's own 2021 calculation, combining AVK's ex-China 8.5 Mt with China's 6.0 Mt, gave 41.4%; the CCIA also cites China's 2010 share as 32.5% of about 10.12 Mt [estimate] [S6] [S7]. Dividing China's 2025 GFRP output by JEC's 2025 range gives 56–67%, and the CCIA's 'above 8.1 Mt' gives 51–61% [estimate: 8.89 or 8.1 ÷ 15.9 and 13.3]. Those ratios mix series and overstate the share if the Chinese figure counts glass-filled thermoplastic compounds that JEC's lower case treats differently; they are a bracket, not a statistic.

Figure 5. China glass-fiber-reinforced plastic products output, 2018–2025Statistic

↔ Scroll horizontally to see the full chart and data table.

0358104.30*20184.45*20195.10*20205.84*20216.41*20226.7220237.5020248.892025Mt

Source: China Glass Fiber Industry Association, 2025 annual development report (28 February 2026) [S3]; 2024 and 2023 values from [S4] [S5]. * 2018–2022 back-calculated from the association's published annual growth rates (+3.5%, +14.6%, +14.5%, +9.8%, +4.8% to 2023) [estimate]. The CCIA gives 5.78 Mt for 2021. Output is derived from yarn consumption, not a plant census.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—20184.3MtGetFRP estimate——
—20194.45MtGetFRP estimate——
—20205.1MtGetFRP estimate——
—20215.84MtGetFRP estimate——
—20226.41MtGetFRP estimate——
—20236.72MtStatistic——
—20247.5MtStatistic——
—20258.89MtStatistic——
Figure 6. China GFRP products by matrix: thermoset vs thermoplasticStatistic

↔ Scroll horizontally to see the full chart and data table.

ThermosetThermoplastic0Mt1Mt3Mt4Mt5Mt3.102.6820213.223.5020233.643.8620244.514.382025

Source: CCIA 2021 brief [S7]; CGFIA 2023 [S5], 2024 via China Jushi [S4], 2025 [S3]. 2021 from the CCIA (thermoplastic 46.4% of GFRP); later years from the glass fiber association. Thermoset overtook thermoplastic again in 2025 on wind demand.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
Thermoset20213.1MtStatistic——
Thermoset20233.22MtStatistic——
Thermoset20243.64MtStatistic——
Thermoset20254.51MtStatistic——
Thermoplastic20212.68MtStatistic——
Thermoplastic20233.5MtStatistic——
Thermoplastic20243.86MtStatistic——
Thermoplastic20254.38MtStatistic——
Table 2. China in the global count: four views that do not reconcile
SourceYearChina figureGlobal denominatorChina shareWhy it differs
JEC Observer via CCIA20213.6 Mt12.1 Mt30%JEC's own estimate of Chinese consumption
CCIA brief20216.0 Mt (5.78 Mt GFRP + 0.22 Mt high-performance)about 14.5 Mt (AVK ex-China 8.5 + China 6.0)41.4%Chinese production statistics with a foreign ex-China estimate
CCIA brief20103.29 Mt GFRPabout 10.12 Mt32.5%Historical association estimate
CGFIA ÷ JEC range (GetFRP)20258.89 Mt GFRP13.3–15.9 Mt56–67% [estimate]Mixed series; Chinese count includes glass-filled thermoplastic compounds

Source: JEC Observer and CCIA [S6] [S7]; CGFIA [S3]; AVK [S1].

6. Fiber and resin layers: where China's share is clearest

China's share is easiest to defend one boundary in, at the fiber. The CCIA put global glass fiber output at 9.5 Mt in 2021 against China's 6.24 Mt of yarn, about two thirds [statistic; estimate for the share: 6.24 ÷ 9.5] [S7]. Since then Chinese yarn output has grown to 8.43 Mt, and Chinese producers' overseas plants added another 0.721 Mt in 2025, up 8.6% [statistic] [S3]. Domestic apparent consumption of glass fiber and products was 6.585 Mt, up 16.7%, so roughly a fifth of Chinese yarn output leaves the country as yarn, roving, fabric or products [statistic; estimate for the share] [S3].

Carbon fiber tells the same story with more value attached. China consumed 132,027 t of carbon fiber in 2025, 59% of world demand by tonnage, but USD 2.64 billion of the USD 5.44 billion global fiber value, or 49% [estimate: 132,027 ÷ 224,510; 2,640 ÷ 5,441.8] [S10]. Domestic producers supplied 86% of Chinese demand in 2025, up from 13.4% in 2015 [statistic] [S10]. The gap between tonnage share and value share is the wind effect: China's own wind blades absorbed about 40,000 t, and another 24,000 t of Chinese fiber left as pultruded spar-cap planks [statistic] [S10].

The resin layer is larger in tonnes than most buyers expect and is rarely included in composites totals. China alone had more than 4 Mt of epoxy capacity in 2025, most of it sold into coatings, electronics and adhesives rather than composites [media] [S14]. That is a reason to keep resin market figures out of composite market sizing altogether: only the share consumed in laminates belongs inside the composite-materials box, and no public source measures that share for China.

For a buyer, the practical reading is that China dominates the commodity inner layers, glass yarn, roving, fabrics and general-purpose resins, and is gaining in carbon fiber volume, while the outer, high-value parts layer is still led by Western and Japanese supply chains in aerospace. Sail's own commentary names commercial aircraft structures as China's main remaining gap [statistic] [S10]. Market share by tonnes therefore overstates China's position in certified, high-value components and understates it in the raw materials that set global price levels.

Figure 7. China glass fiber yarn output, 2018–2025Statistic

↔ Scroll horizontally to see the full chart and data table.

0358104.68*20185.27*20195.41*20206.2420216.87*20227.23*20237.5620248.432025Mt

Source: CGFIA 2025 report [S3]; 2024 via China Jushi [S4]; 2021 via CCIA [S7]. * Back-calculated from the association's published annual growth rates (+12.6%, +2.7%, +15.2%, +10.2%, +5.2%, +4.6%) [estimate]. Pool-kiln yarn was 8.12 Mt or 96.3% of 2025 output.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—20184.68MtGetFRP estimate——
—20195.27MtGetFRP estimate——
—20205.41MtGetFRP estimate——
—20216.24MtStatistic——
—20226.87MtGetFRP estimate——
—20237.23MtGetFRP estimate——
—20247.56MtStatistic——
—20258.43MtStatistic——

7. Which segments drive volume and which drive value

Tonnage is driven by glass fiber in construction, transportation, electrical and wind. In Europe the largest thermoset lines in 2025 were SMC and BMC at 253 kt, non-crimp fabrics at 207 kt, open-mold processes at 160 kt, continuous processes at 113 kt and pipes and tanks at 99 kt [statistic] [S1]. In China the swing factor is wind: high-modulus yarn reached 1.436 Mt in 2025 [statistic] [S3], and global wind demand for carbon fiber reached about 100,000 t, up 127.3% [statistic] [S10].

Value is driven by aerospace, defense and electronics. Aerospace and defense was 12.6% of carbon fiber composite volume in 2025 but 60.8% of its revenue [statistic] [S10]. JEC's 2021 data show the same pattern by region: Asia had about 49% of tonnage but 43% of value, with a value-added index of 90, while the Americas had 28% of tonnage, 32% of value and an index of 113 [estimate] [S6]. Inside the Chinese fiber chain, the CCIA's 2026 analysis of listed companies concludes that profit follows the downstream market a material is sold into, with electronics and wind-linked suppliers earning the most [company] [S15].

Amber fiberglass storage tank with a stainless steel manway and level scale in a cellar
A fiberglass storage tank, one finished product in the 'pipes and tanks' segment. Europe produced 99 kt of composite pipes and tanks in 2025, down from 130 kt in 2020 [S1]. Counting the finished tank in dollars rather than its laminate in tonnes is what moves a market estimate from one boundary to the next. Photo: Cuve en fibre de verre by Olivier Lemoine (Photo-Terroir.fr). CC BY-SA 4.0, via Wikimedia Commons.
Figure 8. Share of volume vs share of valueGetFRP estimate

↔ Scroll horizontally to see the full chart and data table.

Share of volumeShare of value0%25%50%75%100%49.043.0Asia (JEC 2021)28.032.0Americas (JEC 2021)23.025.0EMEA (JEC 2021)12.660.8Aerospace CF composites (Sail 2025)

Source: JEC Observer via CCIA [S6]; Sail [S10]. JEC volume shares are the sums of its regional shares (Asia = China 30% + other Asia-Pacific 19%; Americas = North America 25% + South America 3%; EMEA = Europe 19% + Middle East and Africa 4%). Sail shares are within carbon fiber composites only.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
Share of volumeAsia (JEC 2021)49%GetFRP estimate——
Share of volumeAmericas (JEC 2021)28%GetFRP estimate——
Share of volumeEMEA (JEC 2021)23%GetFRP estimate——
Share of volumeAerospace CF composites (Sail 2025)12.6%GetFRP estimate——
Share of valueAsia (JEC 2021)43%GetFRP estimate——
Share of valueAmericas (JEC 2021)32%GetFRP estimate——
Share of valueEMEA (JEC 2021)25%GetFRP estimate——
Share of valueAerospace CF composites (Sail 2025)60.8%GetFRP estimate——
Table 3. Segment drivers of volume and value
SegmentVolume evidenceValue evidenceWhat it means for buyers
Wind bladesChina high-modulus yarn 1.436 Mt (+65.1%); global wind carbon fiber about 100,000 t (+127.3%)Low price per kg; buyer power with blade makersBig tonnage, thin margins; capacity follows blade programs
Construction and infrastructureChina thermoset direct roving −9.8%; industrial yarn −2.4%Commodity pricingAmple Chinese capacity for profiles, grating and rebar
Transportation and SMC/BMCEurope SMC/BMC 253 kt; Grand View automotive 21.0% of valueMid valueProgram-specific qualification decides supplier choice
ElectronicsChina electronic yarn 0.886 Mt (+9.6%)Highest profit pool in the listed Chinese chainSpecialty fabrics and resins, not bulk FRP
Aerospace and defense12.6% of carbon fiber composite volume60.8% of carbon fiber composite revenueCertification, not capacity, is the constraint
Short-fiber thermoplasticsEurope 1,210 kt, 53% of AVK's total; China thermoplastic GFRP 4.38 MtLow value per kgInflates tonnage totals; exclude when sizing structural composites

Source: CGFIA [S3]; Sail [S10]; AVK [S1]; Grand View [S11]; CCIA [S15].

8. How to read composite market CAGRs, and why figures must not be summed

A compound annual growth rate is only as good as its two end points. Consultancy rates for the same market span 5.97% (Precedence, 2026–2035), 7.90% (Fortune, 2026–2034) and 8.4% (Grand View, 2026–2033) [forecast] [S13] [S12] [S11]. JEC's 2022 outlook forecast 5% a year for 2021–2026 [estimate] [S6]. Measured outcomes bracket those numbers widely: JEC's own tonnage went from 12.1 Mt in 2021 to 13.3–15.9 Mt in 2025, between 2.4% and 7.1% a year; Europe shrank 5.9% a year over the same period; China's GFRP output grew about 10.9% a year from 2018 to 2025 [estimate: from S6, S1, S3].

Volume and value rates are not interchangeable either. Sail's carbon fiber demand rose 43.8% in 2025 while fiber sales value rose 26.3%; composite tonnage rose 38.6% while composite revenue rose 15.6% [statistic] [S10]. Mix moved toward cheap wind-grade material, so a revenue CAGR understated physical growth. The opposite happens when prices rise: a value CAGR in nominal US dollars carries inflation and exchange rates that a tonnage series does not.

Summing is the most common error. Adding glass fiber output, resin output and composite output counts the same fiber two or three times, because each outer boundary contains the inner one. Adding regional figures from different publishers mixes scopes, and even the CCIA's 14.5 Mt global estimate for 2021 combines an AVK ex-China figure with a Chinese production statistic [estimate] [S7]. Compare across rows; never add down a column of different sources.

Five checks before quoting a CAGR

1. Are both end points from the same publisher and edition? 2. Is the base year measured or modeled? 3. Volume or nominal value, and in which currency? 4. Same boundary and matrices at both ends? 5. Has the base year been revised since? AVK cut its 2024 Europe figure from 2,416 kt to 2,351 kt one year later.

Figure 9. Forecast growth rates vs measured growthGetFRP estimate

↔ Scroll horizontally to see the full chart and data table.

Grand View fcst, 2026–338.4 % per yearFortune fcst, 2026–347.9 % per yearPrecedence fcst, 2026–356.0 % per yearJEC fcst, 2021–265.0 % per yearJEC actual, 2021–25, upper7.1 % per year*JEC actual, 2021–25, lower2.4 % per year*China GFRP, 2018–2510.9 % per year*Europe, 2021–25-5.9 % per year*

Source: Grand View [S11]; Fortune [S12]; Precedence [S13]; JEC via CCIA and AVK [S6] [S1]; CGFIA [S3]. Forecasts are value growth in US dollars; JEC, China and Europe rates are volume. * Measured rates are GetFRP calculations from published end points: (13.3 or 15.9 ÷ 12.1)^(1/4) − 1; (8.89 ÷ 4.30)^(1/7) − 1; (2,281 ÷ 2,910)^(1/4) − 1. The Europe bar is negative.

Download chart data (CSV)
View the chart data and evidence
Values used in this chart. Missing observations are not interpolated; estimates and reported ranges retain their labels. The CSV includes sources and scope notes.
SeriesCategoryValueUnitEvidence / value basisReported rangePoint note
—Grand View fcst, 2026–338.4% per yearGetFRP estimate——
—Fortune fcst, 2026–347.9% per yearGetFRP estimate——
—Precedence fcst, 2026–355.97% per yearGetFRP estimate——
—JEC fcst, 2021–265% per yearGetFRP estimate——
—JEC actual, 2021–25, upper7.1% per yearGetFRP estimate——
—JEC actual, 2021–25, lower2.4% per yearGetFRP estimate——
—China GFRP, 2018–2510.9% per yearGetFRP estimate——
—Europe, 2021–25-5.9% per yearGetFRP estimate——

9. Discrepancies between sources, including GetFRP's own reports

This report uses the same anchors as GetFRP's China pultrusion, carbon fiber and eVTOL research: 8.43 Mt of Chinese glass fiber yarn and 8.89 Mt of GFRP products in 2025 from the glass fiber association, and 224,510 t of global carbon fiber demand from Sail [statistic] [S3] [S10]. Checking those anchors against other primaries exposed the differences below. None changes the direction of the analysis, but each matters for anyone building a model.

The largest is China's composites output: the CCIA's 'above 8.1 Mt' for 2025 versus the glass fiber association's 8.89 Mt of GFRP products, and the CCIA's 2026 text also describes China's glass fiber 'capacity' as 8.43 Mt, which is the association's output figure [statistic] [S8] [S3]. Trade data differ too: UN Comtrade shows China exported 2.07 Mt of HS 7019 glass fiber worth USD 3.08 billion in 2025, against the association's 1.95 Mt and USD 2.85 billion for glass fiber and products [statistic] [S16] [S3]. Solar additions are 318 GW in the National Energy Administration's release and 317 GW in the association report [official] [S17] [S3].

Table 4. Flagged discrepancies and how this report handles them
ItemSource ASource BHandling
China composites output, 2025CGFIA: GFRP products 8.89 MtCCIA: composites above 8.1 MtUse CGFIA, the series with a stated method; show CCIA as a bracket
China GFRP, 2021CGFIA growth series: about 5.84 Mt (back-calculated)CCIA: 5.78 Mt (thermoplastic 2.68 Mt)Chart CGFIA back-calculation, cite CCIA split
China glass fiber exports, 2025CGFIA: 1.95 Mt, USD 2.85 bnUN Comtrade HS 7019: 2.07 Mt, USD 3.08 bnCustoms line is wider than the association's product scope
Global composites, 2024JEC via AVK, March 2025: 13.5 MtJEC via AVK, March 2026: 13.2–15.7 MtUse latest edition; note revision
Europe composites, 2024AVK March 2025: 2,416 ktAVK March 2026: 2,351 ktUse latest edition; never mix editions in one series
China share of global, 2021JEC: 30% (3.6 Mt)CCIA: 41.4% (6.0 Mt)Report both; the gap is China's own count vs JEC's estimate
China solar additions, 2025NEA: 318 GWCGFIA: 317 GWCite NEA for energy statistics

Source: CGFIA [S3]; CCIA [S6] [S7] [S8]; AVK [S1] [S2]; UN Comtrade [S16]; NEA [S17].

10. Using market size in a sourcing decision

For procurement, the national market size answers only one question: is there enough capacity that a supplier failure can be replaced? For Chinese glass fiber, thermoset profiles, grating, tanks and pipes, the answer is plainly yes; the 2025 data show a large, partly idle commodity base with a price war in direct roving. For aerospace-grade carbon fiber composites, certified electronics fabrics and specialty resins, it is no, regardless of tonnage. China's epoxy industry illustrates the gap: more than 4 Mt of capacity ran at a 51.44% operating rate in 2025 while high-end electronic grades stayed short [media] [S14].

When a market figure goes into a business case, a board paper or an RFQ justification, record it the way an analyst would, so colleagues can reproduce it:

  • 1. Publisher, report title, edition date and page or table number.
  • 2. Metric (production, consumption, sales or revenue), unit (tonnes or currency), and currency year.
  • 3. Boundary: fiber, intermediate, composite material or finished part; matrices included (thermoset, thermoplastic, short-fiber compounds, ceramic and metal matrix).
  • 4. Geography and whether China, Taiwan and re-exports are counted.
  • 5. Base year, and whether the base year is measured or modeled; forecast end year and CAGR.
  • 6. Revision history: which earlier edition gave a different value for the same year.
  • 7. Evidence class: statistic, association estimate, consultancy forecast or own calculation.
  • 8. For supplier decisions, replace market size with qualified capacity: named plant, product, monthly output, certificates and test reports.

Frequently asked questions

How big is the global composites market in 2025?

By volume, JEC estimates 13.3 to 15.9 million tonnes for 2025, with the range driven by uncertainty about Chinese production. By value, consultancies publish USD 95.74 billion (Fortune, including ceramic and metal matrix composites) and USD 112.4 billion (Grand View) for 2025, and USD 133.20 billion (Precedence) for 2026. The figures measure different boundaries and should not be averaged.

Why do composite market size reports disagree so much?

They measure different things: fiber, intermediates, composite materials or finished parts; tonnes or US dollars; with or without short-fiber thermoplastics, ceramic and metal matrix composites, or full Chinese volumes; measured years or forecasts. Carbon fiber shows the effect: 224,510 t of fiber worth USD 5.44 billion became 366.8 kt of composites worth USD 30.35 billion in 2025.

What is China's share of the global composites market?

Between about 30% and more than half, depending on the denominator. JEC's 2021 data gave China 3.6 of 12.1 million tonnes (30%); the China Composites Industry Association calculated 41.4% for 2021. Dividing China's 2025 GFRP output of 8.89 million tonnes by JEC's 2025 range gives 56–67%, but that mixes series.

How much composite does China produce?

The China Glass Fiber Industry Association estimates 8.89 million tonnes of glass-fiber-reinforced plastic products in 2025, up 18.5%: 4.51 million tonnes thermoset and 4.38 million tonnes thermoplastic. Yarn output was 8.43 million tonnes. The China Composites Industry Association gives a lower figure of above 8.1 million tonnes for all composites.

Which composite segments are growing fastest?

In 2025, wind: China's high-modulus wind glass yarn rose 65.1% and global wind demand for carbon fiber rose 127.3% to about 100,000 tonnes. Electronic yarn rose 9.6%. Construction-linked products fell, with China's thermoset direct roving down 9.8% and Europe's composites production down 3% to 2,281 kilotonnes.

Is the composites market measured in tonnes or dollars?

Associations measure tonnes: JEC, AVK and the Chinese glass fiber association all publish volumes. Consultancies publish US dollars, usually at a wider boundary. Only a few sources publish both for the same scope, such as Sail for carbon fiber composites: 366.8 kilotonnes and USD 30.35 billion in 2025, about USD 83 per kilogram.

How large is the European composites market?

AVK counts 2,281 kilotonnes of composites produced in Europe in 2025, down 3%, of which 1,210 kilotonnes are short-glass-fiber thermoplastics and 952 kilotonnes are thermosets. Europe was 14–17% of global volume on JEC's scenarios, and production has fallen from a 2018 peak of 3,005 kilotonnes in AVK's series.

Can I add glass fiber, resin and composite market figures together?

No. Each outer boundary already contains the inner one, so adding fiber, resin and composite output counts the same material two or three times. Figures from different publishers also use different scopes. Compare them side by side with their unit, boundary and base year, and use one source's series for any growth calculation.

Sources and scope

Figures were cross-checked against primary documents where available; secondary citations are marked in each scope note. Company figures are reported as disclosed by the companies themselves. This note is an independent market assessment and not investment advice.

  1. [S1]AVK Industrievereinigung Verstaerkte Kunststoffe, Composites Market Report 2026 (European market 2025, March 2026)

    JEC global volume 13.3–15.9 Mt (2025) and 13.2–15.7 Mt (2024); European production 2,281 kt with 2011–2025 chart; Table 1 by process including short fiber 1,210 kt, thermosets 952 kt, pultrusion 46 kt, pipes and tanks 99 kt; Europe 14–17% of global.

  2. [S2]AVK, Composites Market Report 2025 (European market 2024, March 2025), hosted by EuCIA

    JEC global 13.5 Mt (2024) and about 13 Mt (2023) with China caveat; European production 2,416 kt (2024) and 2,559 kt (2023), later revised.

  3. [S3]China Glass Fiber Industry Association, 2025 annual development report of the glass fiber and products industry (CFIA-2026, 28 February 2026)

    Yarn 8.43 Mt (+11.5%) with 2011–2025 chart; yarn by type; GFRP products 8.89 Mt (+18.5%), thermoset 4.51, thermoplastic 4.38, derived from yarn consumption; apparent consumption 6.585 Mt; exports 1.9496 Mt and USD 2.852 bn; demand context. Published as page images; read on 3 November 2026.

  4. [S4]China Jushi, 2024 annual report, industry section reprinting association data

    2024 yarn 7.56 Mt; GFRP products 7.50 Mt (+11.6%), thermoset 3.64 Mt, thermoplastic 3.86 Mt; exports 2.022 Mt.

  5. [S5]China Glass Fiber Industry Association 2023 annual report, republished by the Nanjing Fiberglass Research and Design Institute information service (February 2024)

    2023 GFRP products 6.72 Mt (+4.8%), thermoset 3.22 Mt, thermoplastic 3.50 Mt; reinforcement yarn 5.70 Mt.

  6. [S6]China Composites Industry Association, JEC Observer: global composites market 2021–2026 overview (8 March 2022)

    JEC Observer data compiled by Estin & Co: 2021 global about 12 Mt (12.1 Mt) and about USD 37 bn at materials level, parts above USD 100 bn; regional shares and tonnes; value shares and value-added indices; CAGR table 2010–2026. Translated republication.

  7. [S7]China Composites Industry Association, 2021 China composites industry development brief, part 1 (August 2022)

    China composites about 6.0 Mt in 2021 (GFRP 5.78 Mt, high-performance 0.22 Mt); thermoset 3.10, thermoplastic 2.68 Mt; global about 14.5 Mt and China 41.4%; 2010 China 3.29 Mt of about 10.12 Mt (32.5%).

  8. [S8]China Composites Industry Association, The composites industry is moving from 'capacity first' to 'value first', part 1 (7 August 2026)

    China composites output above 8.1 Mt in 2025; carbon fiber capacity about 50% of global; glass fiber 'capacity' 8.43 Mt and above 70% of global (wording conflates output and capacity).

  9. [S9]China Composites Industry Association, Market watch: will Southeast Asia be the next composites manufacturing hub? (3 November 2026)

    Lucintel 2025 consumption: Southeast Asia about 0.7 Mt, North America 3.4 Mt, Europe 2.2 Mt; per-capita about 1 kg vs nearly 9 kg in the United States. Consultancy data via association.

  10. [S10]Guangzhou Sail Carbon Fiber, 2025 global carbon fiber composites market report (April 2026), republished

    Carbon fiber demand 224,510 t (+43.8%), sales USD 5.4418 bn (+26.3%); resin-based carbon fiber composites 366.8 kt (+38.6%) and USD 30.35 bn (+15.6%); aerospace 12.6% of volume and 60.8% of revenue; wind about 100,000 t (+127.3%); China demand 132,027 t.

  11. [S11]Grand View Research, Composites market size and share report 2026–2033 (June 2026)

    USD 112.4 bn in 2025 to USD 212.1 bn in 2033, 8.4% CAGR; Asia-Pacific 46.6%; glass fiber 58.5%; lay-up 36.7%; automotive and transportation 21.0%. Public summary of a paid report; internal inconsistencies noted.

  12. [S12]Fortune Business Insights, Composites market size, share and analysis (updated 19 October 2026)

    USD 95.74 bn in 2025, USD 103.02 bn in 2026, USD 189.62 bn in 2034, 7.90% CAGR; Asia-Pacific 42.20% (USD 40.4 bn); scope includes polymer, ceramic and metal matrix composites.

  13. [S13]Precedence Research, Composites market size, companies and trends 2026–2035

    USD 133.20 bn in 2026 to USD 224.28 bn in 2035, 5.97% CAGR. Public summary; scope details not shown.

  14. [S14]SunSirs, 2025 year-end review of the epoxy resin industry (7 January 2026)

    China epoxy capacity above 4 Mt, operating rate 51.44%, overcapacity in general grades and shortage in high-end grades. Price agency commentary, tagged media.

  15. [S15]China Composites Industry Association, The composites industry is moving from 'capacity first' to 'value first', part 2 (7 August 2026)

    Listed-company table from 2025 annual reports (China Jushi revenue RMB 18.88 bn and net profit RMB 3.285 bn; Jilin Chemical Fiber RMB 5.43 bn and RMB 23 m) and the conclusion that profit follows the downstream market. Company data via association.

  16. [S16]UN Comtrade, China-reported exports under HS 7019 (glass fibers), 2025

    USD 3,076 million and 2.074 Mt net weight, world total; preview API queried 3 November 2026.

  17. [S17]National Energy Administration, 2025 renewable energy grid-connection statistics (12 February 2026)

    120 GW of new wind and 318 GW of new solar capacity connected in 2025.

Image provenance and usage terms appear in each caption; see image credits. Submit a source correction.

Continue your supplier research

  1. Chongqing International Composite Materials Co., Ltd. logo
    Verified
    Process
    Continuous glass-fiber drawing
    Standard
    AS9100D
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    Chongqing Polycomp International Corporation (CPIC), established in 1991, is a Yuntianhua Group company focused on the R&D, production and sale of glass fiber and composite materials. CPIC's official website lists production bases in Chongqing, Zhuhai and Changzhou in China as well as overseas operations, supported by sales subsidiaries in North America, Europe and Hong Kong, China.

    Product categories
    Thermosetting and thermoplastic direct rovingAssembled fiberglass rovingThermoplastic, BMC and wet chopped strands
  2. China Jushi Co., Ltd. logo
    China Jushi Co., Ltd.
    Tongxiang, Zhejiang, China
    Process
    Tank-furnace glass fiber drawing
    Standard
    ISO 9001
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    China Jushi Co., Ltd. is a core enterprise in China National Building Material's fiberglass business division, focused on fiberglass and finished fiberglass articles. Jushi's English website states that the company listed on the Shanghai Stock Exchange in 1999 under stock code 600176 and operates fiberglass production bases in China, Egypt and the United States.

    Product categories
    Fiberglass yarn, roving and reinforcement fabricsChopped strand mat and woven rovingFiberglass products for thermoplastics
    Websitejushi.com
  3. Taishan Fiberglass Co., Ltd. logo
    Taishan Fiberglass Co., Ltd.
    Tai'an, Shandong, China
    Process
    Tank-furnace glass fiber drawing
    Standard
    ISO 9001
    MOQ
    Not publicly listed
    Lead time
    Not publicly listed

    Taishan Fiberglass (CTG) was established in 1997 and focuses on fiberglass and fiberglass-reinforced products. Its official English website describes a diversified product portfolio for pipes and tanks, wind energy, open molding, pultrusion, panels, molding, mats and fabrics, thermoplastics, and electronic and industrial yarns.

    Product categories
    E-glass fiberglass roving and yarnChopped strand mats and fiberglass fabricsElectronic and industrial fiberglass yarns
    Websitectgf.com

Request comparable supplier responses

Send the specification, quantity and destination with the evidence you need.

Submit RFQ